Радиоуправляемые модели самолетов, вертолетов, автомобилей, катеров, яхт и танков.
Гарантируем ваше удовольствие либо возврат денег. На сайте огромное количество отзывов о нашей работе и товарах.
Сервопривод для дрифт моделей Turnigy D-Spec DRFT-303 1/10th 39г / 4.5кг / 0.10сек
-
The Turnigy D-Spec DRFT-303 drift car steering servo offers the ease of use, reliability and speed you would come to expect from this type of servo. It features nylon gears, a high quality motor and real ball bearings to give it silky smooth operation. Its short profile will allow fitment into almost any 1/10th drift car and it is low maintenance due to the self lubricating nylon gears. It also has a colored aluminum heat sink for more efficient heat dissipation, again increasing the life of the servo. It offers a really precise front end on your car to make those long sweeping drifts and quick direction changes that much easier.
Make this Turnigy D-Spec DRFT-303 your drift car steering servo of choice.
Features:
• Aluminum heat sink
• Short profile for better fitting
• Nylon gears
• Quality motor
• Real ball bearings
• Universal installationSpecs:
Weight: 39g
Size: 41mmx20.1mmx28.9mm
Torque: 3.5kg.cm (4.8V) - 4.5kg.cm (6.0V)
Speed: 0.12Sec/60deg (4.8V) - 0.10Sec/60deg (6.0V)
Voltage: 4.8-6.0v
Type: Standard
Gear Train: Nylon
Gear Type: Digital
Motor: Brushed
Spline Count: 25T
Ball Bearing: Yes
Lead Length: 270mm
Plug: JR
-
Перевод устарел, чуть выше - новое англоязычное описание товара!
Данный сервопривод D-Spec DRFT-303 – воплощение простоты и надежности, особенно учитывая более чем низкую цену. Его особенности – нейлоновый редуктор и высококачественный коллекторный двигатель, который обеспечивает оперативное управление автомоделью! Имеется встроенный алюминиевый радиатор для эффективного охлаждения сервопривода. Сервопривод имеет малый (заниженный) профиль, что гарантирует его установку на модели с ограниченным местом под установку сервопривода.
Turnigy D-Spec DRFT-303 – это отличный бюджетный выбор для дрифт моделей!Особенности:
• радиатор из алюминиевого сплава
• заниженный профиль
• редуктор из нейлона
• высококачественный двигатель
• шарикоподшипники
• универсален в установке
Характеристики:
Вес: 39г
Размер: 41x20.1x28.9мм
Усилие: 3,5кг/см(4.8V) – 4,5кг/см(6V)
Скорость: 0.12сек/60гр (4.8V) - 0.10 сек/60гр (6.0V)
Напряжение: 4.8-6v
Тип: стандартный
Редуктор: нейлоновый
Шарикоподшипник: есть
Длина провода: 270мм
Разъем: JR
-
The Turnigy D-Spec DRFT-303 drift car steering servo offers the ease of use, reliability and speed you would come to expect from this type of servo. It features nylon gears, a high quality motor and real ball bearings to give it silky smooth operation. Its short profile will allow fitment into almost any 1/10th drift car and it is low maintenance due to the self lubricating nylon gears. It also has a colored aluminum heat sink for more efficient heat dissipation, again increasing the life of the servo. It offers a really precise front end on your car to make those long sweeping drifts and quick direction changes that much easier.
Make this Turnigy D-Spec DRFT-303 your drift car steering servo of choice.
Features:
• Aluminum heat sink
• Short profile for better fitting
• Nylon gears
• Quality motor
• Real ball bearings
• Universal installation
Specs:
Weight: 39g
Size: 41mmx20.1mmx28.9mm
Torque: 3.5kg.cm (4.8V) - 4.5kg.cm (6.0V)
Speed: 0.12Sec/60deg (4.8V) - 0.10Sec/60deg (6.0V)
Voltage: 4.8-6.0v
Type: Standard
Gear Train: Nylon
Ball Bearing: Yes
Lead Length: 270mm
Plug: JR
Упоминается в статьях и вопросах
Чтобы общаться и совершать покупки необходимо зарегистрироваться.
Это просто и займёт всего одну минуту.
Спасибо за регистрацию!
Для подробностей, наведите курсор на одну из картинок.
Удаленные товары | |||||||
Очистить |