Afro 20A Muti-Rotor ESC OPTO (SimonK Firmware)

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 21 июля 2017 г.

  Developed from the ground up, we wanted to build a truly Multi-rotor specific ESC that would offer the best performance and value in the market today. We wiped the slate clean and looked to the community for inspiration and help in designing an ESC that truly could be known as “The Multi-rotor ESC”
  
  Enter Simon and Hamasaki AKA SimonK and timecop. This combination of hardware and firmware expertise in conjunction with the HobbyKing in house engineering team gave us the edge needed to develop an ESC like no other and hence the Afro series was born.
  
  Boasting high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and smooth power response the Afro ESC series are set to change the expectations of multi-rotor pilots around the globe. The Afro ESC series ship with multi-rotor specific SimonK software preloaded! No need to re-flash. For added convenience the Turnigy USB linker can be used via the PWM signal lead for any future software updates eliminating the need for complicated flashing jigs or the need to cut open the heat shrink.
  
  MikroKopter I2C compatibility has also been built in as standard. A DIY port is available under the shrink wrap which allows using the ESC with MikroKopter hardware that uses I2C control.
  
   • Now Shipping with OneShot125. 
  Some stocks may require to flash ESC to OneShot125 via flash tool referenced in the related items
  
  Specs:
  Current Draw: 20A Continuous
  Voltage Range: 2-6s Lipoly
  BEC: N/A - OPTO
  Input Freq: 1KHz
  Firmware: afro_nfet.hex
  Discharge wire/plugs: 16AWG/Male 3.5mm
  Motor wire/plugs: 17AWG/Female 3.5mm
  Weight: 26.5g (Included wire, plug, heat shrink)
  Size: 45 x 25 x 11mm
  
  Royalties paid on each unit sold to SimonK and Hamasaki for their design work, without which the Afro ESC would never have been born, thanks guys!

  
  

  Предложить перевод