PowerBox Competition w/ Sensor Switch (OLED Version)

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 31 мая 2011 г.

  The PowerBox Competition is the latest innovation from PowerBox Systems.  The PowerBox is a modern power supply system which contains all the electronic components required by today's high-end receivers, servos and models. Every component needed for a totally secure airborne power supply, including IC's, micro controllers and electronic circuits have been duplicated ensuring redundancy, safety and most importantly peice of mind for your investment. The current version of the PowerBox Competition unit includes an integrated graphic OLED screen.
  
  Features:
  High resolution graphical OLED screen with 128x64 pixels
  Programming procedure using the SensorSwitch in conjunction with the OLED screen
  Signal amplification for a total of 12 channels and 18 servos
  4 match channels with 2 servos for each channel
  Double regulated output voltage
  Energy consumption, voltage- and residual capacity display in mAh for both batteries
  Sockets for telemetry bus systems
  Multiplex MSB and Spektrum
  Data feedback by downlink - i.e. for data such as voltage, consumption and residual capacity for both batteries
  Selectable servo voltage of 5,9V or 7,4V
  Minimum value memory displays voltage collapses in flight
  Large area heat-sink area for heat dissipation and even higher performance
  Supports three battery types: NiMh/NiCd, LiFePo
  Suppression of servo feedback currents

  Specification:
  Operating voltage: 4,0 Volts to 9,0 Volts
  Power source:
  2 x two-cell LiPO batteries 7,4 Volts
  2 x five-cell NiCd or. NiMH batteries
  2 x two-cell LiFePo batteries 6,6 Volts (A123)
  Current drain:
  Power-on state approx. 130 mA
  Power-off state approx. 15 µA
  Dropout voltage: approx. 0,25 V
  Max. receiver and servo current: 2 x 10 A (stabilised), 2 x 20 A (Peak - Dependant on cooling) 
  Servo signal resolution: 0,5µs
  Signal frame rate: User variable -  9ms, 12ms, 15ms, 18ms, 21ms
  Screen: OLED 128 x 64 pixels, graphic
  Bus systems: Spektrum, Multiplex
  Servo sockets: 18 sockets, 12 channels, 4 of them match-channels
  Temperature range: - 30 °C to + 75 °C
  Dimensions: 110 x 72 x 24 mm (incl. base plate)
  Weight: 115 g
  SensorSwitch: 15 g
  EMV approval: EN 55014-1:2006
  CE approval: 2004/108/EG
  

  
  

  Предложить перевод