Scratch and Dent FatShark Teleporter V5 FPV Goggles Urban Camo w/1G3 Ground Camera

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 9 июля 2018 г.

  These goggles were returned to us as faulty, we have checked them and can find no faults. The packaging has been opened hence why they are on scratch and dent, other than that they are new and complete with all the original accessories.

  
  Warranty:
  No warranty available for this item.
  Item used as a display item only.
  Please do not ask questions as the item will be sold out within 24hrs.
  No backorders allowed.

  
  Scratch & Dent items are sold as-is.
  Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.

  
  Item will be deactivated once a 0 stock level is reached.

  
  These Teleporter V5 FPV goggles are a full function, self-contained FPV viewing and receiver system that incorporates features normally only found on higher end models.

  
  To start enjoying FPV, simply power the goggles with the included battery pack and connect the 1G3 Ground Camera/transmitter to working voltage from 3.9~6.0 Volts of your on board RC vehicle. (Always double-check polarity before connecting)

  
  The Teleporter V5 features digital head tracking technology that eliminates the need for special RC radios as the display can zoom in on the image while the head tracker controls the viewing window (works best with a wide angle lens on a fixed camera). The head tracker also supports traditional pan/tilt servo mounted camera with trainer-equipped radios.

  
  The supplied Camera incorporates a 25mW 1.3GHz transmitter inside a one-piece case that has been specifically designed to be splash proof so that the camera can be also used with ground-based vehicles.

  
  Features:
  • Large virtual image with 25° field of view
  • Crisp 320 x 240 QVGA resolution display
  • NTSC/PAL Auto Selecting
  • Precision 9DOF 2-axis head tracking system
  • Integrated 1G3, 7CH NexWave RF Receiver
  • 1G3 Ground Camera included

  
  Goggle Specs:
  Field Of View: 25°diagonal
  IPD: 63.5mm (fixed)
  Audio: Stereo
  Input Voltage: 7~13V (2s/3s)
  Consumption: 200/350mA
  Antenna: 1G3 dipole
  Display: Full color QVGA LCD 230k pixels
  Binocular Display: LCD QVGA 320 x 240
  NTCS/PAL: Auto selection
  Battery: 7.4V 760mAh
  Weight: 163g

  
  1G3 Ground Camera Specs:
  Imager: 1/3” 700TVL CMOS
  Lens: 2.2 mm (IR cut)
  System: Analog NTSC
  Tx Ouput: 25mW
  Voltage: 3.9-6V
  Control: Single push button to switch channel (1~8 then back to CH1)
  Connector: 100mm cable, 3p 2.54mm molex servo connector

  
  Frequency Chart:
  Channel Frequency
  1 1080MHz
  2 1120MHz
  3 1160MHz
  4 1200MHz
  5 1258MHz
  6 1280MHz
  7 1320MHz
  8 1360MHz

  
  

  Предложить перевод