Радиоуправляемые модели самолетов, вертолетов, автомобилей, катеров, яхт и танков.
Гарантируем ваше удовольствие либо возврат денег. На сайте огромное количество отзывов о нашей работе и товарах.
Phoenix 1600 EPO R/C планер (PNF)
-
This 1600mm wingspan glider takes 15 minutes to assemble and lasts a lifetime! The wings and tail are made from tough EPO foam. However, the fuselage is made from a really strong blow molded nylon skin with plywood formers, making it almost indestructible. Usually reserved for baby toys*. The virtually indestructible fuselage is smooth and rigid yet still light enough for the glider to perform. Both the main wing and tail are screwed into place and the two wing halves have a carbon fiber rod for added strength. The main wing includes 1 servo per aileron for strong control surface movement plus there is a pre-molded slot so you can add your own flaps later. All 4 9g servos, speed controller and brushless outrunner are included. Just add your own receiver and battery to be flight ready! This really is a super strong glider that takes 15 minutes to put together.
*Having a blow molded fuselage on a glider is an excellent solution however it is not popular amongst manufacturers due to its high cost, effectively doubling molding costs.
Specs:
Wingspan: 1600mm (63 inch)
Length: 1045mm (41 inch)
Flying Weight: 950g
Battery required: 1800mAh 3S
Motor: Brushless 2212-1400KV (included)
ESC: 30A (included)Required:
LiPoly 1800mAh 3S
Tx/Rx
-
Перевод устарел, чуть выше - новое англоязычное описание товара!
Планер не потребует много времени на сборку, всего 15 минут, дальше вы будете только наслаждаться долгими полетами. Крылья и хвост сделаны из жесткой пены EPO, что придает им легкость, достаточную жесткость на кручение, и главное ремонтопригодность, консоли отдельно усилены углепластиковыми стержнями. Фюзеляж отформован в матрице из специального легкого, ударопрочного пластика , теперь он практически не подвержен к разрушению, не будет проблем с разболтавшимся креплением крыльев, хочется добавить, уже установлены сервомашинки управляющие элеронами, на закрылки вы их ставите сами по желанию
Технические характеристики:
Размах крыла: 1600 мм (63 дюйма)
Длина: 1045мм (41 дюймоа)
Полетный вес: 950г
Мотор: бесколлекторный 2815/1050Kv (в комплекте)
ESC: 30A (в комплекте)
Требуется докупить:
LiPoly 1300 ~ 1800mAh 3S
приемник
Tx / Rx
-
This 1600mm wingspan glider takes 15 minutes to assemble and lasts a lifetime! The wings and tail are made from tough EPO foam. However, the fuselage is made from a really strong blow moulded nylon skin with plywood formers, making it almost indestructible. Usually reserved for baby toys*. The virtually indestructible fuselage is smooth and ridgid yet still light enough for the glider to perform. Both the main wing and tail are screwed into place and the two wing halves have a carbon fiber rod for added strength. The main wing includes 1 servo per aileron for strong control surface movement plus there is a pre-moulded slot so you can add your own flaps later. All 4 9g servos, speed controller and brushless outrunner are included. Just add your own receiver and battery to be flight ready! This really is a super strong glider that takes 15 minutes to put together.
*Having a blow moulded fuselage on a glider is an excellent solution however it is not popular amongst manufacturers due to its high cost, effectively doubling moulding costs.
Specs:
Wingspan: 1600mm (63 inch)
Length: 1045mm (41 inch)
Flying Weight: 950g
Battery required: 1300~1800mAh 3S
Motor: Brushless 2815/1050Kv (included)
ESC: 30A (included)
Required:
LiPoly 1300~1800mAh 3S
Receiver
Tx/Rx
Чтобы общаться и совершать покупки необходимо зарегистрироваться.
Это просто и займёт всего одну минуту.
Спасибо за регистрацию!
Для подробностей, наведите курсор на одну из картинок.
Удаленные товары | |||||||
Очистить |