Паркфлаер это сообщество любителей радиоуправляемых моделей. Еще это магазин, в котором можно купить радиоуправляемые модели и комплектующие.
Радиоуправляемые модели самолетов, вертолетов, автомобилей, катеров, яхт и танков.
Гарантируем ваше удовольствие либо возврат денег. На сайте огромное количество отзывов о нашей работе и товарах.
Радиоуправляемые модели самолетов, вертолетов, автомобилей, катеров, яхт и танков.
Гарантируем ваше удовольствие либо возврат денег. На сайте огромное количество отзывов о нашей работе и товарах.
Система стабилизации вертолета Flymentor 3D
Нет в наличии
Вес в упаковке: 199 г
Аналогичные товары | Поставщик | В наличии | Цена / Вес | Количество бонусов за товар | В корзину / Отметить | |
---|---|---|---|---|---|---|
-
Flymentor 3D это система, обеспечивающая стабилизацию положения вертолета, а также восстановление стабильного положения при 3D пилотировании.В комплект входит: основной модуль, гироскоп, оптический датчик движения, компакт диск с програмным обеспечением и USB кабель (руководство по эксплуатации находится на CD).Особенности:
Контроль маневрирования, включая стабилизацию по высоте, скорости и удерживание на висении.
Оптический датчик движения снимает изображения поверхности и предотворащает неконтролируемое скольжение.
Переключаемые режимы работы (режим горизонта и сохранения позиции) посредством отдельного канала управления.
Интегрированный гироскоп с режимом удержания хвостовой балки и системы автомата перекоса.
Контроль чувствительности и режимов встроенного гироскопа посредством отдельного канала управления.
Поддерживаемые типы управления автоматом перекоса 3S 120°, 3S 140°, 4S 90°, 4S 90°+45°
Сохранение баланса в перевернутом полете.
Настраивается с использованием компьютера через USB соединение.
При использовании FM/PPM радиоуправления , при потере контроля над вертолетом Flymentor 30 установит в нейтальное положение рули крена, высоты и направления, сохранит циклический шаг ротора в заданном положении затем переключится в режим сохранения позиции и чувствительности гироскопа в 70%
Характеристики:
Напряжение: 4.8-6.0VТок: 55mA (при наряжении 5V)
Вес: 37г
Рабочие температуры: 0-40 °C
-
Flymentor 3D is a stabilization unit that helps the helicopter to self-stabilize in hover and also self recovery during 3D manuever.
This unit comes with 5 items; the main unit, gyro, CCD sensor, CD software and usb data cable (manual is in PDF format in the CD).Features:
Control all movement, including attitude stabilization, speed control, position locking.
CCO sensor to capture picture of ground, comparing pictures to avoid drifting.
Switch working mode (horizontal mode and position mode) through AUX channel.
Integrating head locking gyro and swash plate mixer.
Control sensitivity and mode of internal gyro through GEAR channel.
Support swash plate 3S 120°, 3S 140°, 4S 90°, 4S 90°+45°
Keep balance in inverted flight.
Configured by computer through USB.
If you are using FM/PPM remote control device, when helicopter is out of control, the Flymentor 30 will set aileron, elevator, rudder to neutral, and keep pitch in the final signal position, and switch to positioning mode automatically, the sensitivity is 70%.
Specification:
Voltage: 4.8-6.0V
Current: 55mA (under 5V)
Weight:37G
Temperature: O'C~ +40'C
Under the stabilisation mode and positioning mode, maximum rotate speed allowed: J Aileron and Elevator: ,;2000 / s
J Tail turning (if using external gyro): ,;3600 / s
-
Flymentor 3D is a stabilization unit that helps the helicopter to self-stabilize in hover and also self recovery during 3D manuever.
This unit comes with 5 items; the main unit, gyro, CCD sensor, CD software and usb data cable (manual is in PDF format in the CD).Features:
Control all movement, including attitude stabilization, speed control, position locking.
CCO sensor to capture picture of ground, comparing pictures to avoid drifting.
Switch working mode (horizontal mode and position mode) through AUX channel.
Integrating head locking gyro and swash plate mixer.
Control sensitivity and mode of internal gyro through GEAR channel.
Support swash plate 3S 120°, 3S 140°, 4S 90°, 4S 90°+45°
Keep balance in inverted flight.
Configured by computer through USB.
If you are using FM/PPM remote control device, when helicopter is out of control, the Flymentor 30 will set aileron, elevator, rudder to neutral, and keep pitch in the final signal position, and switch to positioning mode automatically, the sensitivity is 70%.
Specification:
Voltage: 4.8-6.0V
Current: 55mA (under 5V)
Weight:37G
Temperature: OC~ +40C
Under the stabilisation mode and positioning mode, maximum rotate speed allowed: J Aileron and Elevator: ,;2000 / s
J Tail turning (if using external gyro): ,;3600 / s
-
Flymentor 3D is a stabilization unit that helps the helicopter to self-stabilize in hover and also self recovery during 3D manuever.
This unit comes with 5 items; the main unit, gyro, CCD sensor, CD software and usb data cable (manual is in PDF format in the CD).Features:
Control all movement, including attitude stabilization, speed control, position locking.
CCO sensor to capture picture of ground, comparing pictures to avoid drifting.
Switch working mode (horizontal mode and position mode) through AUX channel.
Integrating head locking gyro and swash plate mixer.
Control sensitivity and mode of internal gyro through GEAR channel.
Support swash plate 3S 120°, 3S 140°, 4S 90°, 4S 90°+45°
Keep balance in inverted flight.
Configured by computer through USB.
If you are using FM/PPM remote control device, when helicopter is out of control, the Flymentor 30 will set aileron, elevator, rudder to neutral, and keep pitch in the final signal position, and switch to positioning mode automatically, the sensitivity is 70%.
Specification:
Voltage: 4.8-6.0V
Current: 55mA (under 5V)
Weight:37G
Temperature: OC~ +40C
Under the stabilisation mode and positioning mode, maximum rotate speed allowed: J Aileron and Elevator: ,;2000 / s
J Tail turning (if using external gyro): ,;3600 / s
Англоязычные отзывы / обсуждения
Упоминается в статьях и вопросах
СОЗДАНИЕ ПРОЕКТА Cobra AH1-Z VIPER218
4 мая 2015 года в 06:42 | Виталий Цалко Ивано-Франковск Статья http://www.parkflyer.ru/blogs/view_entry/11465/  Собираем первый вертолет!(Вертолет для новичка)84
29 марта 2013 года в 22:08 | Руслан Меденцев Рязань Статья http://www.parkflyer.ru/blogs/view_entry/849/  Вертолет HK600GT. Опыт эксплуатации.44
17 сентября 2012 года в 15:48 | Александр Н Санкт-Петербург Статья http://www.parkflyer.ru/blogs/view_entry/188/ 
4 мая 2015 года в 06:42 | Виталий Цалко Ивано-Франковск Статья http://www.parkflyer.ru/blogs/view_entry/11465/  Собираем первый вертолет!(Вертолет для новичка)84
29 марта 2013 года в 22:08 | Руслан Меденцев Рязань Статья http://www.parkflyer.ru/blogs/view_entry/849/  Вертолет HK600GT. Опыт эксплуатации.44
17 сентября 2012 года в 15:48 | Александр Н Санкт-Петербург Статья http://www.parkflyer.ru/blogs/view_entry/188/ 
Войти /
Зарегистрироваться
Я новый пользователь
Чтобы общаться и совершать покупки необходимо зарегистрироваться.
Это просто и займёт всего одну минуту.
Спасибо за регистрацию!
Ваша страна:
Чтобы оформить заказ, выполните несколько простых шагов.
Для подробностей, наведите курсор на одну из картинок.
Для подробностей, наведите курсор на одну из картинок.
Удаленные товары | |||||||
Очистить |
pikulin.nikita@list.ru