Радиоуправляемые модели самолетов, вертолетов, автомобилей, катеров, яхт и танков.
Гарантируем ваше удовольствие либо возврат денег. На сайте огромное количество отзывов о нашей работе и товарах.
Arduino SD слот
Мы сохраняем такие товары, чтобы дать возможность Вам получать информацию из накопленных комментариев и отзывов.
-
SD card module slot socket reader for Arduino ARM MCU. Make your SD application
more easier and simple. It is easily interfaced as a peripheral to your Arduino
sensor shield module. Through programming, you can read and write to the SD card
using your Arduino.
Specs:
Input Voltage: 3.3V/5V
Dimensions: 52mm x 30mm*Note: This is not an original Arduino brand product.
-
Перевод устарел, чуть выше - новое англоязычное описание товара!
Слот для установки SD карты подключаемый к Arduino ARM MCU. Сделайте свое устройство проще . Он легко подключается как периферийное вашему Arduino
При программировании, вы можете как читать так и записывать данные на карту SD с помощью Arduino.
Технические характеристики:
Входное напряжение: 3.3V/5V
Размеры: 52 мм х 30 мм
-
SD card module slot socket reader for Arduino ARM MCU. Make your SD application
more easier and simple. It is easily interfaced as a peripheral to your Arduino
sensor shield module. Through programming, you can read and write to the SD card
using your Arduino.
Specs:
Input Voltage: 3.3V/5V
Dimensions: 52mm x 30mm
Чтобы общаться и совершать покупки необходимо зарегистрироваться.
Это просто и займёт всего одну минуту.
Спасибо за регистрацию!
Для подробностей, наведите курсор на одну из картинок.
Удаленные товары | |||||||
Очистить |
К arduino подключается напрямую.
SD slot-----ARDUINO
GND------------GND
+3.3-----------3.3V
+5---------------5V
CS----------------4
MOSI-------------11
SCK--------------13
MISO-------------12
GND------------GND (Важно! Без этого соединения не работает)
Библиотека:
Родная SD.h из базового комплекта
Пример кода:
//встроенные примеры
/*
SD card read/write
This example shows how to read and write data to and from an SD card file
The circuit:
* SD card attached to SPI bus as follows:
** MOSI - pin 11
** MISO - pin 12
** CLK - pin 13
** CS - pin 4
created Nov 2010
by David A. Mellis
modified 9 Apr 2012
by Tom Igoe
This example code is in the public domain.
*/
#include <SD.h>
File myFile;
void setup()
{
// Open serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
Serial.print("Initializing SD card...");
// On the Ethernet Shield, CS is pin 4. It's set as an output by default.
// Note that even if it's not used as the CS pin, the hardware SS pin
// (10 on most Arduino boards, 53 on the Mega) must be left as an output
// or the SD library functions will not work.
pinMode(10, OUTPUT);
if (!SD.begin(4)) {
Serial.println("initialization failed!");
return;
}
Serial.println("initialization done.");
// open the file. note that only one file can be open at a time,
// so you have to close this one before opening another.
myFile = SD.open("test.txt", FILE_WRITE);
// if the file opened okay, write to it:
if (myFile) {
Serial.print("Writing to test.txt...");
myFile.println("testing 1, 2, 3.");
// close the file:
myFile.close();
Serial.println("done.");
} else {
// if the file didn't open, print an error:
Serial.println("error opening test.txt");
}
// re-open the file for reading:
myFile = SD.open("test.txt");
if (myFile) {
Serial.println("test.txt:");
// read from the file until there's nothing else in it:
while (myFile.available()) {
Serial.write(myFile.read());
}
// close the file:
myFile.close();
} else {
// if the file didn't open, print an error:
Serial.println("error opening test.txt");
}
}
void loop()
{
// nothing happens after setup
}