Радиоуправляемые модели самолетов, вертолетов, автомобилей, катеров, яхт и танков.
Гарантируем ваше удовольствие либо возврат денег. На сайте огромное количество отзывов о нашей работе и товарах.
22-х полюсовый двигатель Turnigy Multistar 4108 600KV (для мультироторных ЛА)
-
Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximizing Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings and High Poles counts for less noise, smooth and responsive power and increased efficiency. They have custom motor mounting and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use and are not based on airplane motors.
The 4108-600 MultiStar is almost too nice to fly! The workmanship and detail in this motor is at a whole new level. It’s fitted with shimmed and pre-loaded NMB bearings and has 570mm long high grad silicon wires. It has dual prop mounting, either a bolt on 6mm shaft prop hub or the 12mm spacing bolt threw prop attachment with a precision upper thrust washer for an unlimited range of props. And with 22P24S pole count its smooth efficient and has loads of torque.
Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.
Specs:
KV(RPM/V): 600
Lipo cells: 4-6s
Max current: 400w
Max Amps: 26A
No Load Current: 0.9A/10v
Internal Resistance: .098ohm
Number of Poles: 22P24S (22poles 24 stators)
Dimensions(Dia.xL):47 x 26mm
Motor Shaft: 4mm
prop shaft: 6mm bolt on hub or 12mm hole to hole for bolt threw style props
Weight: 111g
bolt hole spacing: 19mm * 25mm
-
Перевод устарел, чуть выше - новое англоязычное описание товара!
Вы ищете крутой двигатель для вашего коптера? Можете не продолжать, ведь вы его уже нашли!
Turnigy multistar разработаны с применением 22-х высококачественных 45SH магнитов и подшипников калифорнийской компании NMB, что делает работу двигателя тише, отзывчивее и эффективнее, а крутящий момент от большего кол-ва полюсов заметно выше, чем на моторе такого же класса, но с меньшим кол-вом полюсов . Эти двигатели созданы специально для мультироторных ЛА и не преднозначены для использования в качестве силового двигателя на самолет.
Возможны два варианта крепления винта: на так называемый пропсейвер (например этот) или же на входящий в комплект адаптер.
Технические характеристики:
Kv(об. в минуту на вольт): 600
LiPo ячейки: 4-6s (14,8-22,2В)
Макс. мощность: 400Вт
Макс. ток: 26А
Холостой ток: 0,9А про напряжении 10В
Сопротивление обмотки: 0,098Ом
Кол-во магнитов: 22 (24 на статоре)
Размеры:
Длина: 26мм
Ширина: 46,6мм
Диаметр вала: 4мм
Размер отверстия пропеллера: 6мм (с пропсейвером) или 12 мм (с адаптером)
Вес: 111г
Расстояние между крепежными отверстиями: 19мм и 22мм
-
Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximizing Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings and High Poles counts for less noise, smooth and responsive power and increased efficiency. They have custom motor mounting and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use and are not based on airplane motors.
The 4108-600 MultiStar is almost too nice to fly! The workmanship and detail in this motor is at a whole new level. It’s fitted with shimmed and pre-loaded NMB bearings and has 570mm long high grad silicon wires. It has dual prop mounting, either a bolt on 6mm shaft prop hub or the 12mm spacing bolt threw prop attachment with a precision upper thrust washer for an unlimited range of props. And with 22P24S pole count its smooth efficient and has loads of torque.
Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.
Specs:
KV(RPM/V): 600
Lipo cells: 4-6s
Max current: 400w
Max Amps: 26A
No Load Current: 0.9A/10v
Internal Resistance: .098ohm
Number of Poles: 22P24S (22poles 24 stators)
Dimensions(Dia.xL):46.6 x 26mm
Motor Shaft: 4mm
prop shaft: 6mm bolt on hub or 12mm hole to hole for bolt threw style props
Weight: 111g
bolt hole spacing: 19mm * 25mm
Упоминается в статьях и вопросах
Чтобы общаться и совершать покупки необходимо зарегистрироваться.
Это просто и займёт всего одну минуту.
Спасибо за регистрацию!
Для подробностей, наведите курсор на одну из картинок.
Удаленные товары | |||||||
Очистить |
есть формула - http://www.maltemedia.de/brushless/wicklungsschema/?Nuten=9&Pole=12&Berechnen==&Ergebnis=
первое окошко сколько у статора полюсов вторая сколько магнитов.если буква с заглавной то мотать по часовой стрелке(А),если маленькая то против(а) .
Удачи.
Исправил.
ХК где вы раньше были?