PowerBox Gemini II Voltage Regulator w/SensorSwitch

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 6 февраля 2014 г.

  The Gemini II is the logical development of the PowerBox Gemini, which has been unchanged since 2005. The revised design incorporates ideas gleaned from customer requests and continued testing. The Gemini II is considerably higher performance than the earlier model, since the case now consists of a high-quality machined aluminium heat-sink. Numerous supplementary features have also been added. For example, the pilot now has two options for activating the system: either by push-button using the SensorSwitch, or using a magnet. This also allows the implementation of a concealed installation. When using the magnet option a integral buzzer indicates the ON and OFF state.
         
  Like all power supply systems from PowerBox Systems, the Gemini II boasts consistent redundant construction: two regulators, two controllers and two integral Hall sensors ensure a totally reliable power supply. The external SensorSwitch activates both electronic switches simultaneously. The tri-colour LEDs in the SensorSwitch indicate the battery status in four stages. The battery inputs take the form of MPX high-current connectors. The output voltage is double-regulated, and can be set either to 5.9 V or 7.4 V.
  
  The Gemini II is a perfect regulator for those seeking the best reliability and redundancy for high performance models like large helis, high power EDF units, or turbine jets. The Gemini II is made in Germany by PowerBox Systems.
  
  Features:
  • Double-regulated output voltages for receivers and servos
  • Electronic On / Off switch, using either a magnetic trigger or the SensorSwitch
  • Regulated output voltage of 5.9 V or 7.4 V
  • Servo feedback current suppression
  • Supports LiPo, NiMH / NiCd, LiFe batteries
  • Separate LED voltage indicator for each battery
  • Anodized heat sink case dissapates heat
  • Integral regulator monitor
  • MPX battery inputs
  • Visual and audible On/Off indicators
  
  Specs:
  Operating Voltage: 4.0~9.0V
  Power Supply: 2 x 2S 7.4V Lipoly/LiFe Battery or 2 x 5 cell NiCD/NiMh Battery
  Current Drain: 58 mA
  Voltage Drop: 0.30 V
  Output Voltage: 5.9V or 7.4V
  Max. Continuous Current: 2 x 6A
  Temperature Range: -30 to +75C
  Dimensions: 60 x 30 x 15mm
  Weight: 33g including all leads
  SensorSwitch: 11g

  
  

  Предложить перевод