Turnigy™ Mobius 2 Axis Gimbal with AX2206 Motors W/O Controller

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 6 марта 2015 г.

  Turnigy™ has recognized the Mobius ActionCam as the go-to camera for RC enthusiasts and set out to make a low cost, light weight, quality component 2-Axis gimbal to match the Mobius’s smaller size.

  Design of the Turnigy™ Mobius gimbal started with the popular AX 2206 BLGM Brushless motor, perfect for its small size and is well known as a great motor. From there Turnigy had the motors custom made to match their spec. 

  Turnigy™ then set out to create a lightweight and robust frame around the Mobius and your chosen hardware which is compatible with the Quanum Nova and DJI Phantom Quadcopters.

  The result is one of best gimbals available for the user that wants the flexibility of choosing their own controller and best of all it’s made specifically for the Mobius.

  Features:
  • Light Weight
  • AX2206 Gimbal motors
  • Roll and pitch control
  • Adjustable axis position
  • ALL CNC Aluminium and composite frame

  Frame Specs:
  Size: HxWxL 76x67x100mm max all around size
  Weight: 160g (including motors)

  Motor Specs Turnigy ™ AX2206:
  Poles: 12N14P
  KV(RPM/V): 140
  Resistance: 11.25omh
  Weight: 32.3g
  Wire: 0.17mm
  Torque: 230g
  Bottom holes center to center: 16mm and 19mm
  Top holes center to center: 12mm 

  Included:
  Mount Frame and fasteners
  Vibration damping balls
  Controller mounting board
  2 Turnigy ™ AX2206 brushless outrunner motors

  Note: This is a Kit and does require some assembly.

  Note: Please pay close attention to the bolt locations in the instructions, and note the pitch motor uses the two 6mm bolts, if the 8mm bolts are used could damage the motor windings causing the pitch axis to shake when powered.

  Note: Camera and Controller Not Included

  
  

  Предложить перевод