Rctimer E320 Multirotor Tuned Propulsion System 1-2.5kg

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 17 марта 2015 г.

  The E320 Motor Package a fine-tuned propulsion system specifically engineered for multi-rotor copters weighing 1-2.5kg.

  
  

  Features

  Rctimer Carbon Fiber 9.4*4.3 ”  Self-locking Prop

  Representing the state of the art in this industry, the 9.4*4.3“ rotor offers an approx. 20% ~ 25% improvement over the 8.0*4.5” rotor without the need of using a heavier motor, making the 350 ~ 500 model quad copter achieve a significantly higher lift and thus more powerful to carry a camera and gimbal setup (FPV). The rotors are carefully balanced dynamically, you will never be bothered by jello effect from your airborne rolling shutter camera. The low inertial design enables your flight controller to use a much higher gain value to achieve a higher stability and maneuverability all at once.

  MT2610 Motor

  1. The magnet specification is 42 uh.

  2. The bearing is NMB(Japan) , it can support a long life.

  3. 0.20mm laminations, maximum efficiency and minimum Eddy Current losses.

  4. Ultra-flexible motor leads with high-temp 220 °silicone rubber.

  5. 2.0mm bullet connectors already installed.

  6. With rotor dynamic balance process.

  7. The prop adapters in CW/CWW rotation

   NFS30A (OPTO ESC)

  RCtimer NFS series ESC are all N-FETs and Finally a 16MHz Crystal,SimonK firmware, they are professional for Multi-Rotor, we have release NFS ESC now and put the lowest price on it, enjoy your flying now!

  Conclusion NFS30A is a ny nice ESC, works very well, has all NFETS and FINALLY a 16 MHz Crystal so no temperature drift of ESC calibartion.

  Specs

  Prop: 

  - Material: Carbon fiber

  - DJI Phantom Version 2 compatible

  - Built-in self-locking nut, manual installation

  - Higher tension, easy to install

  - Includes CW/CCW propeller 4pairs

  - Length: 9.4inch

  - Pitch: 4.3inch

  Motor: 

  KV: 920

  Configuration: 12N14P

  Shaft Diameter: 3mm

  Motor Dimensions(Dia.*Len):Φ32x22

  Weight (g): 54g

  ldle current(10)@10v(A): 0.7A

  No.of Cells(Lipo): 3-4S

  Max Continuous current(A)180S: 30A

  Max Continuous Power(W)180S: 450W

  Max. efficiency current: (4-12A)>85%

  internal resistance: 0.11Ω

  ESC:

  Input voltage:DC 6-16.8V(2-4S Lixx)

  Running current:30A(Output:  Continuous 30A, Burst 40A up to 10 Secs.)

  Size:  36mm (L) * 26mm (W) * 7mm (H).

  Weight: 32g.

  UBEC: without(OPTO)

  Package included:

  2 sets CW MT2610 MOTOR(screw type M3*6)
  2 sets CCW MT2610 MOTOR(screw type M3*6)
  4 pcs NFS30A ESC
  2 pairs Carbon Fiber 9.4x4.3" Self-locking prop
  12 pcs 3.5mm female connector
  1 pcs 150mm Φ4.0 Heat Shrink Tube

  
  

  
  

  Предложить перевод