Pixhawk v2.4.6 Flight Controller Final Release

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 16 сентября 2015 г.

  Description:
  
  - Improvencents on v2.4.5( added the second PMEG2005CT and 350ma ResettableFuse )
  - Strict accordance with PX4 2.4.6 Schematic
  - Redeveloped and optimized circuit without changing any components
  - Build in certificate and could use Official MissionPlanner and ECLIPSE for firmware upgrade without clone prompt
  - We supply the bootloader in the SD card in case of emergency
  - Optimized original case with Polyester cabonate and white transparent black available
  
  Key Features:
  - 168 MHz / 252 MIPS Cortex-M4F
  - 14 PWM / Servo outputs ( 8 with failsafe and manual override, 6 auxiliary, high-power compatible )
  - Abundant connectivity options for additional peripherals ( UART, I2C, CAN )
  - Integrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply ( fixed-wing use )
  - Backup system integrates mixing, providing consistent autopilot and manual override mixing modes ( fixed wing use )
  - Redundant power supply inputs and automatic failover
  - External safety switch
  - Multicolor LED main visual indicator
  - High-power, multi-tone piezo audio indicator
  - MicroSD card for high-rate logging over extended periods of time
  - The name of the outside packaging is called Pixmaker
  
  Specifications:
  
  Processor
  - 32bit STM32F427VIT6 Cortex M4 core with FPU
  - 168 MHz
  - 256 KB RAM
  - 2 MB Flash
  
  Sensors
  - ST Micro L3GD20 gyroscope
  - ST Micro LSM303D 14 bit accelerometer / magnetometer
  - MEAS MS5611 barometer
  - InvenSence MPU6000 accelerometer / gyroscope
  
  Interfaces
  - 5x UART ( serial ports ), one high-power capable, 2x with HW flow control
  - 2x CAN ( one with internal 3.3V transceiver, one on expansion connector )
  - Spektrum DSM / DSM2 / DSM-X® Satellite compatible input
  - Futaba S.BUS® compatible input and output
  - PPM sum signal input
  - RSSI (PWM or voltage) input
  - I2C
  - SPI
  - 3.3 and 6.6V ADC inputs
  - Internal microUSB port and external microUSB port extension
  
  Power System and Protection
  - Ideal diode controller with automatic failover
  - Servo rail high-power ( max. 10V ) and high-current ( 10A+ ) ready
  - All peripheral outputs over-current protected, all inputs ESD protected

  Specification

  General	Type: Flight Controller
  Dimension and Weight	Package weight: 0.1860 kg Package size (L x W x H): 15.00 x 6.00 x 4.00 cm / 5.91 x 2.36 x 1.57 inches
  Package Contents	Package Contents: 1 x Pixhawk V2.4.6 Flight Board, 1 x CLASS10 8G Memory Card, 1 x Silicone Safety Switch, 1 x Silicone Buzzer, 1 x Receiver Connecting Cable, 1 x PPM Encoder

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  
  

  Предложить перевод