REDCON CM621 2.4G 6CH Microlite Full-Range Receiver for DSM2 Standard DIY Transmitter

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 5 февраля 2016 г.

  Features:
  Patent pending model match prevents flying a model using the wrong model memory ( feature does not work with module systems ).
  Servo Sync ( feature does not work with module systems )
  Preset failsafe system.
  Quick connect
  Horizontal-Pin configuration
  Red LED indicates number of hold
  
  Brand Name: REDCON
  Item Name: CM621 receiver
  Band: 2.4GHz
  Channel: 6
  Modulation: DSM2
  Dimensions ( W x L x H ): 18.5 x 40 x 10mm
  Weight: 6g
  Voltage Range: 4 - 10v
  Brown-Out Voltage: 4.0v  ( always supply power above this voltage )
  Antenna Length Main RX: 30mm
  Expected Range: 300m ( tested with Spektrum DX4E )
  Compatibility ( Spektrum and JR DSM2 ): DSX7, DSX9, DSX11, DX18
  Note: This receiver may not compatible with EU market spektrum transmitters ( which doesn't support DSM2 ).
  
  Binding Procedure:
  1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Receiver LED should illuminate it means bind is accomplished
  2. To set fail-safe throttle and control surface positions, ( minimum throttle and all control surfaces set to neutral is suggested ). Press and hold the bind button of transmitter ( LED will illuminate ), turn on the transmitter.
  3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now.
  4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on and connect battery into BIND channel is recommended. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.

  Specification

  General	Type: Transmitter,Receiver
  Remote Controller Specifications	Protocol: DSM2/DSMX
  Dimension and Weight	Product weight: 0.010 kg Package weight: 0.150 kg Product size (L x W x H): 4.00 x 1.85 x 1.00 cm / 1.57 x 0.73 x 0.39 inches Package size (L x W x H): 10.00 x 5.00 x 3.00 cm / 3.94 x 1.97 x 1.18 inches
  Package Contents	Package Contents: 1 x REDCON CM621 Receiver, 1 x Bind Plug

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  
  

  Предложить перевод