REDCON 2.4G 9CH CM921 DSM2 DSMX Receiver CM921S Satellite Spektrum JR Compatible

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 5 февраля 2016 г.

  Features:
  The CM921 is composed of an internal and an external receiver, using dual channel radio frequency hopping technology
  Compatible with all the Spektrum and JR 2.4G transmitter
  Support the default type all channel protection function
  Wireless simulator interface( W.D.S.C ), support REFLEXTR, G3, G4, G5 fly simulator
  D.S.C function has cancelled for more stable version
  
  Brand Name: REDCON
  Item Name: CM921 + CM921S receiver satellite
  Band: 2.4G
  Channel: 9CH
  Material: Plastic
  Modulation: DSM2 / DSMX
  Dimension: 50 x 30 x 13mm
  Weight: 36g
  Voltage: 4-10V
  
  Binding Procedure:
  Step 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and satellite LED's should illuminate.
  
  Step 2. To set fail-safe throttle and control surface positions, ( minimum throttle with and all control surfaces set to neutral is suggested ).  Press the bind button ( LED will illuminate ). Turn on the transmitter. 
  
  Step 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now.
  
  Step 4. Remove binding harness from the BIND channel.  Restart the receiver by cycling it's power off and back on.  All channels should function properly now.  You may test fail-safe by holding sticks in corner, cycle transmitter off.  Surfaces and throttle should return to your preset fail-safe positions set in.
  
  General Notes:
  Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security.  Always remember to remove the binding harness after successful bind is completed. 

  Specification

  General	Type: Receiver,Receiver Board
  Dimension and Weight	Product weight: 0.036 kg Package weight: 0.150 kg Product size (L x W x H): 3.00 x 5.00 x 1.30 cm / 1.18 x 1.97 x 0.51 inches Package size (L x W x H): 10.00 x 5.00 x 3.00 cm / 3.94 x 1.97 x 1.18 inches
  Package Contents	Package Contents: 1 x REDCON CM921 + CM921S Receiver Satellite, 1 x Bind Plug

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  
  

  Предложить перевод