KINGKONG HEX 300 FPV Plug and Play (Red)

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 16 февраля 2016 г.

  The KINGKONG team have done it again. Using their sharp and distinctive looking Hex 300 frame they have added a great package of gear to make an excellent Plug and Play package complete with FPV camera and Video TX.

  The kit has everything you need from a pre tuned mini CC3D flight controller to down to the Spironet Antenna. 

  The motors are KINGKONG 1806-2280KV (CW and CCW) powered by KINGKONG 12A OPTO BLHeli ESC’s. With a UBEC (5v 3A) power to the PDB. 5040 Propellers will give you that unique HEX sound.

  There is a preinstalled FPV camera and video TX so just tune in the channel and get flying. The FPV camera is angled so you see where you are going when the race is on.

  Just to ensure that your competitors know where you are there is super bright LED strip at the rear as this will be the only part they will see. 

  This exciting packing not only looks the part but will give you hours of racing enjoyment at the right price.

  Features:
  • Fully molded unibody glass fiber reinforced chassis
  • KINGKONG 1806-2280KV Motors (CW and CCW)
  • KINGKONG 12A 2-4S OPTO BLHeli ESC’s
  • KINGKONG 5V-3A UBEC
  • Power and Video distribution board with XT60
  • Mini CC3D Flight Controller
  • 5040 Propellers (CW and CCW)
  • FPV Camera 1000TVL CMOS
  • 200mW 5.8GHz Audio/Video Transmitter
  • 5.8GHz Circular Polarized Spironet Antenna
  • Action camera mount
  • Super bright LED module (Make sure your competition knows it's you over taking them!)

  Frame Specs:
  Wheelbase: 300mm
  Weight: 179g (bare frame)
  Material: Nylon+Fiber

  Motor Specs:
  KV(RPM/V): 2280KV
  Voltage: 7.4-14.8V (2-4S LiPoly)
  Max Thrust: 290g
  Number of Poles: 12N/14P
  Propeller: 5”
  Prop shaft: 5mm
  Motor Shaft: 2mm
  Diameter: 23mm
  Length: 30mm
  Weight: 24g
  Bolt hole spacing: 16mm or 19mm M3

  ESC Specs:
  Input Voltage: 7.4-14.8V (2-4S LiPoly)
  Constant: 12 Amps
  Burst: 20 Amps (5sec max.)
  BEC: No BEC, OPTO only
  Dimensions: 50x16x6mm
  Weight: 7.5g (with wires)

  UBEC Specs:
  Input Voltage: 6V~28V/DC (2-4S LiPoly)
  Output Voltage: 5V
  Ripple: Constant: 3 Amps
  Dimensions: 53x17x7mm
  Weight: 12g

  Camera Specs:
  Format: PAL
  TVL: 1000
  Sensor: CMOS
  Lens Type: F2.0/2.8mm (IR-CUT)
  Input Voltage: 5 ~ 12V DC
  View Angle: 120deg

  Video TX Specs:
  Modulate: Wideband FM Modulate
  Video Format: NTSC/PAL
  Output Impedance: 50 Ohm
  Output Power: 23~24dBm
  Channel: 32CH
  Operating Voltage: 7V~24V
  Supply Current: 190mA
  Operating Temperature: -10~85
  Video Band Width : 0~8.0 MHz
  Audio Carrier Frequency: 6.5MHz
  Video Input Level: 0.8~1.2 Vp-p
  Video Input Impedance: 75 Ohm
  Audio Input Level: 0.5~2.0 Vp-p
  Audio Input Impedance: 10K Ohm
  Connector: RP-SMA
  Dimension: 40mm x 23mm x 8mm
  Weight: 10g (without antenna)

  Channels:
  Band A:  5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
  Band B:  5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
  Band E:  5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
  Band F:  5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880

  Includes:
  1 x KINGKONG HEX 300
  20 x 5040 Pros (10CW + 10CCW)
  1 x Spironet Antenna
  1 x ESC PC software communication adapter
  1 x Action Cam dampened mount
  1 x Cable pack
  1 x Cable tie pack
  1 x Antenna mount set
  1 x USB Cable

  Required:
  5-6 Channel RX/TX
  1300-2200mah 11.1V ;1000-1800mah 14.8V

  
  

  Предложить перевод