BeeRotor Victory230 FPV Racing Quadcopter 200mW RTF

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 4 июня 2016 г.

  Guide:

   

  Manual: 

   

  Thread:

   

  Video:

  BeeRotor has designed the new Victory 230 as a purebred, high-speed FPV racer. This comes with high power Rctimer FR2205-2300KV Red Edition Racing Motors. The processor by F3, RCTimer X-Drone 20A ESCs, Serial receiver support… and so much more, and so much more. Victory230 is ARF, just add a compatible R/C Rx (PPM/SBUS/SumD/DSM2/DSMX and RSSI input), and a battery, and go race, everything else is included, from the BeeRotor Tx antenna, to the props.

  Features:

  • Optimization for Cleanflight/Betaflight firmware
  • ARM Cortex-M4 core STM32F303CC with 32bit/72MHz/256K Flash/40K SRAM and hardware floating point unit
  • MPU6050 and BMP180 Sensors
  • Build-in 8MB flash for black box log recorder
  • Receiver connector with PPM/SBUS/SumD/DSM2/DSMX and RSSI input
  • On board OSD with absolutely original MAX7456EUI+ and standard FTDI debug port
  • Connectors for SWD/GPS/MAG/soft-serial/cam-stab servo
  • On board Buzzer/12 WS2812B RGB LED/5V-3A BEC
  • On board voltage & current sensors
  • X-Drone20A ESC 3~4S with BLHeli firmware
  • High power FR2205/2300KV Red Edition motors and BR5x4x3 propellers
  • 700 lines CCD camera M12-2.8IR 3MP (PAL)
  • 200mW Video transmitter, 40 channels: Cover A, B, E, F bands and R bands

  Specs:

  Size (diagonal): 230mm
  Motors: FR2205-2300KV Red Edition
  ESC: X-Drone20A
  Flight Controller: STM32F303CC "BeeRotorF3(BRF3)"
  OSD:Full Graphic
  Arms: Φ12 Carbon Fibre tube
  64Mbit flash for logging
  Rx Support: PPM/SBUS/SumD/DSM2/DSMX and RSSI input
  Rx Selection: Fully Automatic
  Case: Zipper case included
  USB Port: Through-Hole (Much more robust)
  LED Board:  more robust
  FlightCam: BeeRotor 700TVL CCD / M12-2.8IR(3MP)
  Weight: 368g without battery

  MLT230 VTX

  The LT230 transmitter packs 200mW of ultra clean 5.8GHz power in a micro sized video/audio transmitter! A must for those looking save size and weight while still getting good performance. The LT230 is transmitting a full range of 40 channels and only weighs less than 10g. It’s perfect for a wide range of aircraft!

  Features

  40 channels: Cover A, B, E, F bands and R bands 
  Micro sized and light weight
  Transmitter frequency: 5645-5945MHz with 500mW power output
  Transmitting distance > ~1500m (open area)
  LED indicators for Fr/Ch

  LT230 specs:

  Modulate: Wideband FM Modulate
  Video Format: NTSC/PAL
  Output Impedance: 50 Ohm
  Output Power: 20-22dBm
  Channel: 40 CH
  Operating Voltage: 3.7-5.2V
  Supply Current: 300mA (550mA@3.7V)
  Operating Temperature: -10~85 Video Band Width : 0~8.0 MHz
  Audio Carrier Frequency: 6.5 MHz
  Video Input Level: 0.8~1.2 Vp-p
  Video Input Impedance: 75 Ohm
  Audio Input Level: 0.5~2.0 Vp-p
  Audio Input Impedance: 10K Ohm
  Connector: SMA Female
  Antenna connection: SMA Male
  Dimension: 25m x 18.5mm x 6mm
  Weight: 6.4g (without antenna)

  Frequency and channel frequency table:

  Band A 5865 5845 5825 5805 5785 5765 5745 5725
  Band B 5733 5752 5711 5790 5809 5828 5847 5866
  Band E 5705 5685 5665 5645 5885 5905 5925 5945
  Band F 5740 5760 5780 5800 5820 5840 5860 5880
  Band R (B&E both bright) 5658 5695 5732 5769 5806 5843 5880 5917

  Included:

  1 x Victory230 Quad, Fully assembled and tested
  1 x Victory230 Zipper case
  1 x SBUB Interface Cable
  4 x BeeRotor 5x4x3 Tri Props
  1 x Extra one set Plastic parts
  1 x GoPro mount

  
  

  Предложить перевод