GB210 210mm Wheelbase DIY Frame Kit Racing Drone

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 21 июля 2016 г.

  
  Main Features:
  Len's seat pitch ( support CCD, CMOS camera board aircraft )
  Upper body version with a plurality of antenna holes to facilitate fixed antenna
  Body with 1.5mm 3K full carbon fiber
  3mm 3K full carbon arm
  Rational layout, easy to install
  ESC can be installed arm, it can also be installed in the fuselage
  Compatible AOMWAY 700 line camera mounts
  
  Specifications:
  210mm airframe specifications:
  Diagonal wheelbase: 210mm
  Rack weight: 80g
  Support motor: 1306 3000KV / 1804 2300KV / 1806 2300KV ( 1806 / 4045 recommend inch paddle )
  Support propeller: 4 or 5 inch
  Color: black
  Mounting dimension: 200 x 165 x 62 mm
  Net weight: 91g
  
  Acro SP3 specifications:
  6DOF
  Panel color: black
  Board size: 35 x 35 x 8 mm / 1.4 x 1.4 x 0.3 inch
  Net weight: 23g
  Package weight: 29g
  
  EMAX RS2205 brushless motor specifications:
  Weight: approx. 30g with wires
  Wire AWG: 20AWG
  Stator diameter: 22mm
  Stator height: 5mm
  Shaft diameter: 3mm
  Configuration: 12N14P
  Motor diameter: 27.9mm
  Motor height: 31.7mm
  Prop adapter shaft thread: M5
  Input voltage: 3 - 4 S ( 12.6 - 16.8 V )
  KV2300 with HQ5045 BN max. thrust: 1024g
  
  30A mini ONESHOT ESC specifications:
  BEC: none
  Current: 30A
  Burst current: 35A up to 10 seconds
  Bootloader: BLheli
  MCU: SiLabs
  Firmware: BLheli 14, OneShot ready
  Battery: 2 - 6 S LiPo
  Size: 35 x 17 mm
  Weight: 11g with wires
  
  PCB ( 5 - 12 V ) specifications:
  2oz copper and 4-layers PCB
  Solder bridges of various voltage for camera and VTX
  DC / DC synchronous buck regulator, efficiency is up to 95 percent
  TVS( transient voltage suppressor ) protection for DC / DC chip
  Dimensions: 36 x 36 mm
  Weight: 6g
  Mounting holes: 30.5mm square spacing
  12.4 - 16.8 V, 1300 - 1800 mAh ( 3 - 4 S ) battery ( not included )

  Specification

  General	Type: Frame Kit
  Dimension and Weight	Product weight: 0.5800 kg Package weight: 0.7250 kg Product size (L x W x H): 20.00 x 16.50 x 6.20 cm / 7.87 x 6.5 x 2.44 inches Package size (L x W x H): 28.00 x 18.00 x 8.00 cm / 11.02 x 7.09 x 3.15 inches
  Package Contents	Package Contents: 1 x Quadcopter Frame, 4 x Motor, 4 x ESC, 4 x CW Propeller, 4 x CCW Propeller, 1 x F3 Flight Controller, 1 x Power Distribution Board, 1 x Accessory Set

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Disclaimer:
  We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.

  Note:
  Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод