Holybro Shuriken X1 V2 200mm FPV Racing Drone - BNF

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 21 октября 2016 г.

  
  New ESCs in Place:
  V2 has BLHeli F39X 30A ( 40A burst current ) ESCs with yaw oscillation problem fixed. Please note that you will have the upgrade version from April 2, 2017.
  Description:
  Shuriken X1 is a high-performance FPV racing drone of the latest design from Holybro. Shuriken X1 is highly integrated with F3 flight controller, OSD, PDB and FPV transmitter, which enables you to assemble all the modules without welding.
  Its height is still lower than those drones with conventional "X" frames, even when the GoPro Session is mounted on.
  Shuriken X1 consists of these reputed high-performance components. Just take it out of the box and enjoy the very thrilling yet stable flight!
  
  Main Features:
  - Full 3K carbon fiber, 4mm ultra thick propeller arms
  - Nickel-plated 12.9 screws
  - Anti-slip black anodized spacers
  - Flight controller, OSD, PDB, video transmitter and voltage / current sensor are all integrated, which makes an integral structure with a much lower center of mass
  - 5.8GHz 40-channel 200mW / 600mW switchable FPV transmitter with built-in push button and LED channel display
  - High-quality SpiroNet antenna
  - Integrated MWOSD ( preloaded with firmware V1.5 )
  - 600TVL PAL camera with 2.5mm lens, 1/3 inch Super HAD II CCD
  - Compatible with SBUS, DSMX, and PPM receivers
  - 3-colour LED board controlled by LED strip signal
  - Two mounting positions for the FPV camera: one for 0 to 40 degree angle of view, the other for 35 to 70 degree angle of view
  - Includes TPU GoPro Session mount ( 35 degree angle of view )
  - BetaFlight pre-loaded, CleanFlight ready
  
  Specifications:
  - 32-bit F3 flight controller
  - MPU6050 gyroscope / accelerometer
  - ATmega328P with Arduino boot loader ( minimOSD )
  - MAX7456 monochrome on-screen display ( minimOSD )
  - FTDI cable compatible pinout ( minimOSD )
  - Oneshot125 BLHeli F39X 30A ESCs ( 40A burst current )
  - T-MOTOR 2305 2600KV motors
  - Compact size and 200mm diagonal length for 5 inch propellers
  - Input voltage: 7 - 42V
  - Filtered voltage output 5.2V 2A
  - Weight: 343g ( excluding battery )
  - Remote control distance: 300 meters

  Specification

  General	Brand: Holybro Type: Frame Kit
  Camera	Video Resolution: 600TVL Video Standards: PAL
  Dimension and Weight	Product weight: 0.3430 kg Package weight: 0.8900 kg Product size (L x W x H): 26.00 x 22.00 x 8.00 cm / 10.24 x 8.66 x 3.15 inches Package size (L x W x H): 32.00 x 31.00 x 12.00 cm / 12.6 x 12.2 x 4.72 inches
  Package Contents	Package Contents: 1 x Shuriken X1, 1 x 5.8G Mushroom Antenna, 1 x Gopro Session Protector ( TPU 3D Print ), 1 x Camera Strap, 2 x Zip Tie, 1 x Cable

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод