GBX210 210mm Carbon Fiber DIY Frame Kit RC Racing Drone

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 11 ноября 2016 г.

  
  Specifications:
  Carbon Fiber Frame
  Weight: 92g
  Wheelbase: 210mm
  Size: 190 x 180mm
  Height: 35mm
  Arm length: 5 inches
  Upper / lower plate thickness: 4mm
  Lateral board thickness: 2mm
  Other board thickness: 1.5mm
  PDB with 5V / 12V BEC and XT60 plug
  
  F3 ACRO 6DOF with OSD
  Panel color: black
  Board size: 35 x 35 x 8mm
  Net weight: 23g
  
  DYS XS30A BLHeli-S 3 - 6S LiPo ESC
  MCU: high-performance EFM8BB2 50MHz MCU
  Weight: 8.65g
  Size: 45 x 16.5 x 5.8mm
  BLHeli-S does Damped Light
  Firmware upgradable via signal wire ( works with USB connector for XM series )
  Supports motors with super high KV ( EFM8BusyBee 50MHz can handle up to 500k eRPM )
  Supports 1 - 2ms signal, Oneshot125, Oneshot42 and Multishot
  High-current burst rating
  High-resolution throttle steps
  
  DYS Fire 2206 2300KV 3 - 6S Motor
  Thrust: 1450g
  Motor size: 27.7 x 17.7mm ( diameter x height )
  No. of cells: 3 - 6S LiPo
  Weight: 31.69g
  Imported ISC bearing
  N54 magnets, M5 hollow shaft
  0.1mm lamination
  
  FOXEER TM25 5.8G 40CH Transmitter
  Model: TM25 Switcher
  Video format: NTSC / PAL
  Output impedance: 50 ohm
  Output power: 25 / 200 / 600mW
  Input voltage: DC 7 - 24V
  Output voltage: DC 5V
  Operating temperature: -10 to +85 Deg.C
  Video band width: 0 - 8.0MHz
  Audio carrier frequency: 6.5MHz
  Video input level: 0.8 - 1.2Vp-p
  Audio input level: 0.5 - 2.0Vp-p
  Audio input impedance: 10k ohm
  Connector type: SMA
  Size: approx. 41 x 25 x 7mm / 1.6 x 1 x 0.3 inches
  Net weight: 12g
  
  FOXEER HS1189 XAT1200M FPV Camera
  Model: HS1189 XAT1200M
  Image sensor: 1/2.7 inch CMOS
  Resolution: 1200TVL
  Camera system: PAL / NTSC
  Total pixels: 1280 ( H ) x 960 ( V )
  Min. illumination: Color Mode: 0.05lux ( F1.2, 50 IRE, AGC ON ); BW Mode: 0.001lux ( F1.2, 50 IRE, AGC ON )
  2D-DNR: 0 - 100
  3D-DNR: 0 - 100
  Sense-up: yes
  Image adjustment: yes
  BLC / HLC: yes
  WDR: built-in
  S/N ratio: more than 50dB
  White balance: auto
  Day / night switch: Auto / External Control / Color / Black and White
  Private shading: yes
  Language: Chinese / English
  Video out: 1.0Vp-p, 75 ohm
  Input power: 5 - 22V
  Working temperature: -20 to 60 Deg.C
  Working humidity: relative humidity less than 90 percent
  Size: 26 x 26mm
  
  Antenna
  Item: 5.8G 3dBi omnidirectional antenna
  Frequency range: 5600 - 5950MHz
  Gain: 3dBi
  Weight: 12g
  SWR: less than 1.5, tuned for 5600 - 5950MHz
  Max. power: 50W
  Resistance: 50ohm
  Polarization: RHCP
  Horizontal lobe width: 360 degree
  Vertical lobe width: 120 degree
  
  5045 3-blade Propeller
  Quantity: 10 pairs
  Mounting hole: 5mm
  Size: 140 x 140 x 65mm

  Specification

  General	Brand: DYS Type: Frame Kit
  Motor	KV: 2300 Shaft Diameter: M5 Motor Dimensions: 27.7 x 17.7mm ( diameter x height ) No. of Cells: 3 - 6S LiPo
  Camera	Camera Pixels: 1280 ( H ) x 960 ( V ) Video Resolution: 1200TVL
  Dimension and Weight	Product weight: 0.380 kg Package weight: 1.010 kg Product size (L x W x H): 19.00 x 18.00 x 3.50 cm / 7.48 x 7.09 x 1.38 inches Package size (L x W x H): 27.00 x 17.00 x 8.00 cm / 10.63 x 6.69 x 3.15 inches
  Package Contents	Package Contents: 1 x GBX210 Carbon Fiber Frame, 4 x Motor, 4 x ESC, 10 x Pair of Propellers, 1 x Camera, 1 x Flight Controller, 1 x Antenna, 1 x FPV Transmitter

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод