Pixracer Autopilot Xracer V1.0 Flight Controller - Mini PX4

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 12 ноября 2016 г.

  
  Description:
  The new Pixracer ( formerly called XRacer ) is available now and it is fully supported by the Arducopter and PX4 community.
  Pixracer is the first autopilot of the new FMUv4 Pixhawk generation. It comes with an upgraded sensor generation, a plug-in WiFi board and a 2MB Flash - a significant improvement compared to former versions.
  
  

  Specifications:
  Item: Pixracer V1.0
  MCU: STM32F427VIT6 rev.3
  FRAM: FM25V02 - G
  Ultra low noise LDOs ( low dropout regulator ) for sensors and FMU ( force management unit )
  MPU9250, ICM20608, barometer MS5611, magnetometer HMC5983
  Connectors: GPS + I2C, RC - IN, PPM - IN, RSSI, SBUS - IN, Spektrum - IN, USART3 ( TXD, RXD, CTS, RTS ), USART2 ( TXD, RXD, CTS, RTS ), FrSky - IN, FrSky - OUT, CAN, USART8 ( TXD, RXD ), ESP8266 ( full set ), SERVO1 - SERVO6, USART7 ( TXD, RXD ), JTAG ( SWDIO, SWCLK ), PowerBrick ( VDD, Voltage, Current, GND ), BUZZER - LED
  Connecotor: JST GH series ( for easy and robust peripheral connections )
  Power supply: 5 - 5.5V DC from USB or PowerBrick connector
  Dimensions: 36 x 36 x 1.5mm ( 30.5 x 30.5mm spacing, 3.2mm mounting holes )
  Pixracer weight: 26g ( including SD card adapter and CNC protective case )
  
  Including Micro SD card, card reader, RGB LED board and ESP8266 802.11bgn WiFi module ( built-in )
  Containing a full set of professional flexible silicone cables for almost any peripheral module
  
  
  Click here to see more details.

  Specification

  General	Type: Flight Controller
  Dimension and Weight	Package weight: 0.0820 kg Package size (L x W x H): 5.00 x 5.00 x 3.00 cm / 1.97 x 1.97 x 1.18 inches
  Package Contents	Package Contents: 1 x Pixracer V1.0 Flight Controller, 1 x Accessory, 1 x 1GB SD Card, 1 x SD Card Adapter, 1 x Sticker, 6 x Cable

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод