Wimshurst Static Machine Physics Electrostatic Generator Electricity Tesla

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 19 января 2017 г.

  Attention:
  The Color of this item is changed to Light Blue.Please make sure you know before you bid.
  Thank you very much!
  
  Item Description:
  1.The two plates are supported in two rigid uprights and driven by belt in opposite direction.
  2.They are heavy, high resistance plastic with sectors of aluminium sheet.
  3.Two leyden jars (condensers) made form corning glass and aluminium foil.
  4.The whole body is mounted on a plastic base nicely polished.
  
  Specification:
  Size(Length x Width x Height): 28.5 x 20 x 33cm
  Disk Dia.: 24cm
  
  Package incluldes:
  1 x Electrostatic Generator
  
  Principle:
  The operating principle of the machine is based on two counter-rotating disks made of insulating
  material. Each disk has several metal segments attached to it, called sectors. As the sectors pass
  one another, they induce a charge imbalance on one another. This imbalance is drained off at the
  collecting electrodes.
  
  Construction:
  A number of metal foil sectors are pasted on an acrylic disc. Two set of brushes are mounted on the
  charge collectors - one on the front and another on rear disc. When the discs are rotated, the brushes
  collect the electrostatic charge of the metal foil which is transferred and stored in the Leyden jar capacitor.
  When a very high voltage is achieved, electrostatic breakdown occurs and spark between the electrodes
  is seen and heard.
  
  Setup:
  1.Set the gap between the two electrodes to about 1-2 inches
  2.Rotate the handle slowly at first and increase the rotation.
  3.Once the voltage of the capacitor is enough to overcome electrostatic breakdown at the electrodes,
     discharge will take place and spark is seen or heard.
  4.After completing the experiment, discharge across the electrodes, and then across both capacitors
     using the metal "Y" handle.
  
  Precautions:
  1. As machine generates high voltage, do not touch the metal parts while operating the machine.
  2. Remember to discharge across the electrodes with metal “Y” handle after completing the experiment.
  3. Do not rotate the handle too vigorously as the pulley system may get damaged.
  4. If the spark is not seen or heard, check it up for moisture entrapping into brushes. The machine may
      be kept in the sun or near some heating device to remove the moisture
  
  
  

  
  
  

  
  
  

  
  
  

  
  
  

  
  
  

  
  
  

  
  
  

  
  
  

  
  
  

  
  

  Предложить перевод