DZ180 180mm FPV Racing Drone - PNP

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 23 января 2017 г.

  
  Specifications:
  dys BX1806 Motor
  KV: 2700
  Stator diameter: 18mm
  Stator length: 6.0mm
  Shaft diameter: 2.0mm
  Motor dimension: 23 x 17.5mm ( diameter x height )
  No. of cells: 3 - 4S LiPo
  Weight: 22g
  Max. continuous current: 18.2A
  Max. continuous power: 305.8W
  Internal resistance: 0.14 ohm
  
  dys XM20A ESC
  Input voltage: 3 - 4S LiPo
  BEC: no
  Function: Oneshot125
  Type: BLHeli bootloader and firmware
  Weight: 5.8g
  Size: 24 x 14 x 4.5mm
  
  SP Racing F3 Acro
  STM32F303 CPU, 72MHz inc FPU
  High-capacity flash
  MPU6050 accelerometer / gyro
  Dimension: 3.5 x 3.5cm
  Weight: 6g
  
  Camera
  Recording resolution: HD 720P ( 1280 x 720 )
  Recording frame rate: 30fps
  Recording format: avi
  AV output: VGA 640 x 480
  Angle of view: 100 degree
  Min. illumination: 1 lux
  Power supply: 7 - 16V 2 - 4S battery
  Consumption current: 280mAh when recording
  SD card support: max. 32GB
  
  Video Transmitter
  Channels: 40 ( including RaceBand - Band 4 )
  Transmit power: 200mW
  Transmission distance: 500 meters in open air
  Weight: 12g
  Dimension: 51 x 20mm
  
  Operation Instruction:
  - How to change frequencies ( bands / channels )
  Press "Band / Channel" once to change channels; push and hold the button for 2 seconds to change bands.
  - How to record
  After power-up, record LED turns red for standby, press "Record" to start recording, and the red LED will continue twinkling. Press "Record" again to stop recording and save.

  Specification

  General	Type: Frame Kit
  Motor	Model: BX1806 KV: 2700 Stator Length: 6.0mm Stator Diameter: 18mm Shaft Diameter: 2.0mm Motor Dimensions: 23 x 17.5mm ( diameter x height ) No. of Cells: 3 - 4S LiPo Max. Continuous Power (W): 305.8W Internal Resistance: 0.14 ohm CW / CCW: CCW,CW Operating Voltage / Current: 18.2A
  Camera	Video Resolution: HD 720P ( 1280 x 720 ) External Memory: Micro SD card up to 32GB (not included)
  Electronic Speed Controller	Firmware: BLHeli Functions: Oneshot125 Continuous Current: 20A
  Dimension and Weight	Product weight: 0.360 kg Package weight: 0.650 kg Product size (L x W x H): 17.50 x 14.50 x 5.80 cm / 6.89 x 5.71 x 2.28 inches Package size (L x W x H): 20.00 x 19.00 x 9.00 cm / 7.87 x 7.48 x 3.54 inches
  Package Contents	Package Contents: 1 x DZ180 FPV Racing Drone ( including 1 x Frame Kit, 4 x BX1806 Motor, 4 x XM20A ESC, 1 x SP Racing F3 Acro Flight Controller, 1 x FPV Camera with Integrated Video Transmitter, 4 x Propeller, 1 x Mushroom Antenna )

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Note:
  Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод