Jumper X73S 73mm Mini Brushless FPV Racing Drone - ARF

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 23 января 2017 г.

  
  Description:
  Jumper X73S is the tiniest brushless FPV racing drone since its wheelbase is only 73mm. It has 1103 10000KV high RPM motors that rotate furiously, enabling it to fly past like a gust of wind. You only need a 1S LiPo to power it, and bind before takeoff.
  
  Main Features:
  - Only has a wheelbase of 73mm, and weighs 34g after the installation of propeller guard
  - High-performance Naze32 6DOF flight controller, configurable via BetaFlight firmware
  - 1103 10000KV brushless motors and strong propellers provide you with a stable and high-speed flight
  - BLHeli 3.5A brushless ESCs help you get better control of the rotation of motors
  - 600TVL HD PAL camera and 5.8G 32CH 25mW AV transmitter bring low image noise and good connectivity
  
  Specifications:
  Aircraft
  Wheelbase: 73mm
  Flight controller: Naze32
  Firmware: BetaFlight
  Brushless motor: 1103 10000KV
  ESC: BLHeli 3.5A ( supports 1S LiPo )
  AV transmitter: 5.8G 32CH 25mW
  Weight: 34g
  Takeoff weight: less than 43g
  
  Camera
  Sensor: 1/4 inch HD
  Resolution: 600TVL
  Min.Illumination: 0.5 lux
  SNR: more than 48dB
  GAMMA: 0.45
  TV system: PAL
  Refresh rate: 50fps
  Shutter speed: 1/50 to 1/100,000s
  Working temperature: -40 to +85 Deg.C
  White balance: auto
  Video output: 1Vp-p 75 ohm
  Synchronous system: internal synchronization
  
  Receiver Options:
  FrSky 8CH receiver / Futaba receiver
  
  Transmitter Options:
  DSMX transmitter
  Futaba transmitter
  
  Note:
  It is recommended to use 1S 450mAh 25C LiPo battery as the power supply to have 5 - 6 minutes' flying.

  Specification

  General	Brand: Jumper Type: Frame Kit Version: ARF
  Motor	Model: 1103 KV: 10000 CW / CCW: CCW,CW
  Camera	Video Resolution: 600TVL Video Standards: PAL
  Electronic Speed Controller	Firmware: BLHeli
  Dimension and Weight	Product weight: 0.0340 kg Package weight: 0.2050 kg Package size (L x W x H): 16.00 x 16.00 x 8.00 cm / 6.3 x 6.3 x 3.15 inches
  Package Contents	Package Contents: 1 x Drone, 1 x Receiver, 1 x Propeller Guard, 1 x Connection Cable, 1 x Other Accessory

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Note:
  Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод