Jumper X86 86mm Mini Brushless FPV Racing Drone - BNF

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 4 мая 2017 г.

  
  Specifications:
  General
  Wheelbase: 86mm
  Flight controller: F3 with integrated OSD, race timer and BEC
  Processor: STM32F303 MCU
  IMU: MPU6000
  Brushless motor: 1104 7500KV
  ESC: BLHeli - S 10A DShot ESC, compatible with 2S LiPo
  AV transmitter: 5.8G 32CH 25mW
  FPV distance: 200m ( free of obstacles )
  Receiver: FrSky D8
  
  FPV Camera
  Sensor: 1/4 inch CMOS
  Resolution: 600TVL
  Min. illumination: 0.5 lux
  SNR: more than 48dB
  Gamma: 0.45
  TV system: PAL
  Refresh rate: 50fps
  Shutter speed: 1/50 - 1/100,000s
  Working temperature: -40 to 85 Deg.C
  White balance: auto
  Video output: 1Vp-p 75 ohm
  Synchronization: internal
  Color: yes
  
  Recommended Power Source ( not included ):
  Battery: 2S 500mAh 25C LiPo

  Specification

  General	Type: Frame Kit Version: BNF
  Motor	Model: 1104 Motor Type: Brushless Motor KV: 7500
  Flight Controller	Flight Controller Type: F3
  Camera	Video Resolution: 600TVL Video Standards: PAL Sensor: CMOS
  Electronic Speed Controller	Firmware: BLHeli-S Continuous Current: 10A
  Dimension and Weight	Product weight: 0.0780 kg Package weight: 0.1870 kg Product size (L x W x H): 12.00 x 12.00 x 6.00 cm / 4.72 x 4.72 x 2.36 inches Package size (L x W x H): 15.00 x 14.00 x 7.00 cm / 5.91 x 5.51 x 2.76 inches
  Package Contents	Package Contents: 1 x Frame Kit, 4 x Motor, 1 x F3 Flight Controller, 1 x ESC Set, 1 x Mini FPV Camera, 1 x Protective Cover, 4 x Propeller

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Note:
  Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод