Eachine Wizard X220S FPV Racer RC Drone Omnibus F4 5.8G 72CH 30A Dshot600 800TVL iRangeX iRX-i6X RTF

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 23 мая 2017 г.

  Eachine Wizard X220S Omnibus F4 5.8G 72CH VTX 30A BLheli_S Dshot600 ESC 800TVL Camera With 30° Runcam3/Gopro Session Camera Mount
  

  
  

  Dear customers,
   

  Attention please.

  1. The first 500 items of Eachine Wizard X220S come with iRangeX iRX-i6X remote control and iR-A8S receiver, after the first 500 items it will come with Flysky FS-i6X remote control and FS-A8S receiver.

  Both of the iRX-i6X and FS-i6X are compatible with iR-A8S and FS-A8S.
  2. The flexible glue anti-vibration motor pad may cause the motor to slip, please check and tighten the screws before flying.

   

  Best regards,

  Banggood 

   

  
  

  
  
  
  
  
  
  
  
  
  
  
  
  
  Description: 
  
  

  Item	Specification
  Eachine Wizard  X220S	Wheelbase: 220mm Frame arm: 4mm carbon fiber Weigh: 356g (without battery and camera mount) Take off weigh: 561g Package weigh: 1728g 3K carbon fiber frame kit, 4mm thickness and 15mm width frame arms, the width is 10mm less than Eachine Wizard X220. Frame kit with camera angle scale and 30° camera mount for Runcam 3 Gopro session.  Anti-vibration sponges to protect the racer frome crashing.
  Eachine  MN2206 2300KV motor	KV: 2300 Max thrust: 1100G Length: 35MM NO.OF cell: 3-5S Diameter: 28MM Framework: 12N14P Shaft: 3MM Propeller: 5 inch Weight: 28g
  Eachine 30A BLHELI_S  4 in 1 ESC	Con. current: 30A Peak current (10S): 35A Input  voltage: 2-5S BEC: 5V output Programming: YES Firmware: blheli_s Weight: 28g Size: 36*36MM
  Eachine 1179 800TVL CCD camera	Color: purple Sensor: CCD Resolution(horizontal center): 800TVL Shell size: 25mm*25mm Weight: 11g Resolution: PAL: 1980H×1080 (2MP)  Format: PAL Video output: 1.0Vp-p/75Ω Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB. AWB: ON/OFF Exposure mode: electron exposure Electronic shutter: 1/50(1/60) - 1/100000 S Gamma correction: 0.45/1.0 Synchronization method: internal synchronization Lens: standard 2.8mm lens  Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V) Workig current: 70mA (low power consumption) Workig temperature: -20℃--60℃ Humidity: 0%~98%  Strong backlighting effect
  5.8G 72CH 25MW 200mw 600MW switchable transmitter	Video Format  : NTSC/PAL Channel: 72CH Operating Temperature : -10~85℃ Connector: RP-SMA Female Antenna connector: RP-SMA Male
  Omnibus F4 V3 flight controller	Size: 36x36mm Mount holes: 30.5x30.5mm STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time.  Using F4 MCU controls OSD over SPI bus in DMA mode. OSD Configation has been included in Betaflight GUI.  SBUS/PPM input (Pinheaders) 6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders) With barometer SPI Sensor MPU6000 Included 128Mbit Flash, please always use BEC for the FC. Supported by BETAFLIGHT and dRonin
  iRangeX iRX-i6X / Flysky FS-i6X 2.4GHz 10CH remote control	Channel: 6-10 (Default 6) Model Type: Fixed-Wing/Glider/Helicopter RF Range: 2.408-2.475GHz RF Power: < 20dBm RF Channel: 135 Bandwidth: 500KHz 2.4GHz System: AFHDS 2A / AFDHS Modulation Type: GFSK Stick Resolution 4096 Low Voltage Warning: < 4.2V DSC port: PS/2 Port PPM Chargeable: No Antenna Length: 26mm (Dual Antenna) Weight: 392g Power: 6V DC 1.5AA*4 Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight Size: 174x89x190mm On-line Update: Yes Color: Black Certificate: CE0678, FCC ID: N4ZFLYSKYI6X
  iRangeX iR-A8S / Flysky FS-A8S receiver	Channels: PPM 8CH Model type: Multi-rotor Frequency range: 2.408-2.475GHz Band width: 500KHz Band number: 135 RX Sensitivity: -92 dBm 2.4GHz system: AFHDS 2A Modulation type: GFSK DSC port: PPM Transfer method: FHSS Data output: 1.5mm*3 Pin  PPM Antenna length: 26mm (Not including brass contacts) Input power supply: 4.0-8.4V Display method: LED No ground interference ( Transmitting and receiving 1 m from the ground): >300m Working current: 40mA Each channel data: depend on the transmitter Channel delay: <15mS Size: 20*14*5.3mm Weight: 1.2g Certificate: CE0678, FCCID: N45ZA8S00
  1500mAH 4S 14.8V 75C battery	Capacity(mAh) : 1500 Cells (s): 4 Weight (g): 177 Length(mm): 80 Width(mm): 30 Height(mm): 33 Connector: XT60
  Eachine 5051 3-blade propeller	Color: purple Quantity: 10 Pairs Mounting Hole: 5mm

  
  Eachine wizard X220S FPV drone english manual
  
  Package included:
  

  1 x Eachine Wizard X220S frame kit

  1 x iRangeX iRX-i6X / Flysky FS-i6X remote control

  1 x iRangeX iR-A8S / Flysky FS-A8S receiver

  2 x 2206 2300KV motor CW 

  2 x 2206 2300KV motor CCW

  1 x Eachine 30A BLHELI_S  4 in 1 ESC

  1 x Omnibus F4 V3 flight controller

  1 x 800TVL camera 

  1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
  

  10 x Eachine 5051 3-blade propeller purple CW

  10 x Eachine 5051 3-blade propeller purple CCW

  1 x 1500mAH 4S 14.8V 75C battery
  1 x 30° Camera Mount(For Runcam3/Gopro session)

  1 x B3 Pro charger

  1 x Pagoda antenna

  2 x Battery strap

  2 x Wrench
  (Package doesn't include Runcam 3, the Runcam 3 on the pictures for reference only.)

   

  
  

  Предложить перевод