Eaglet - 85 85mm Mini FPV Racing Drone - PNP

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 1 июля 2017 г.

  
  Description:
  Eaglet - 85 85mm mini FPV racing drone is a brilliant racer which has a great potential to bring you the unprecedented flight. You just need to attach a 2 - 3S LiPo onto it, then, you are able to enjoy piloting the drone at a high speed with maximum immersion. More importantly, you are allowed to adjust the parameters via BetaFlight ground station or with the transmitter, know the real-time RSSI and brake whenever you like.
  
  Main Features:
  ● Efficient flight because of the 85mm wheelbase, aerodynamic canopy, and 1104 7500KV brushless motors
  ● Minicube F3 flight controller supports CleanFlight and BetaFlight; self-balancing, semi-self-balancing and manual mode
  ● OSD and ESC settings can be adjusted remotely by the BetaFlight ground station and the transmitter respectively
  ● BLHeli - S ESC uses DShot600 ( default ) to ensure the anti-interference and fast responses for freewheeling
  ● 600TVL CMOS camera works with the CM27T 5.8G 48CH 25mW VTX, offering you the real-time FPV within 150m
  
  Specifications:
  General
  Wheelbase: 85mm
  Size: 113 x 114 x 52mm
  Weight: 60g ( not including battery )
  Frame: 3K carbon fiber
  Brushless motor: 1104 7500KV
  Brushless ESC: 4-in-1 BLHeli - S 10A
  Propeller: 1.9 inch five-blade
  Camera: 600TVL CMOS
  Video transmitter: CM275T 5.8G 48CH 25mW
  Flight controller: Minicube BetaFlight F3 6DOF
  Buzzer: with LED light
  Compatible receiver: DSM / SBUS / PPM
  RSSI: support
  
  Minicube F3 6DOF Flight Controller
  Size: 27 x 27 x 5mm
  Mounting hole: 20 x 20mm
  Processor: STM32F303 MCU
  IMU: MPU6000 SPI
  OSD: BetaFlight OSD
  Firmware: OMNIBUSF3 BetaFlight 3.1 DShot
  
  Minicube 4-in-1 BLHeli - S 10A ESC
  Size: 27 x 27 x 5mm
  Mounting hole: 20 x 20mm
  Power supply: 2 - 3S LiPo
  Continuous current: 4 x 10A
  Burst current: 4 x 15A ( up to 10s )
  BEC output: 5V 1A
  Firmware: BLHeli - S 16.5
  BetaFlight passthrough ready
  DShot600 ready ( default )
  Programmable: yes
  
  Recommendation:
  Power source: 7.4V 500mAh 50C ( not included )
  Estimated flight time: 3 - 5 minutes

  Specification

  General	Type: Frame Kit Version: PNP
  Motor	Model: 1104 Motor Type: Brushless Motor KV: 7500
  Flight Controller	Flight Controller Type: F3
  Camera	Video Resolution: 600TVL ( horizontal ) Sensor: CMOS
  Electronic Speed Controller	Firmware: BLHeli-S Functions: DShot600,Multishot,Oneshot125,Oneshot42 Input Voltage: 2 - 3S
  Dimension and Weight	Product weight: 0.0600 kg Package weight: 0.1550 kg Product size (L x W x H): 11.30 x 11.30 x 5.20 cm / 4.45 x 4.45 x 2.05 inches Package size (L x W x H): 15.00 x 15.00 x 6.20 cm / 5.91 x 5.91 x 2.44 inches
  Package Contents	Package Contents: 1 x Eaglet - 85 FPV Racing Drone

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод