BAT - 100 100mm Mini FPV Racing Drone - PNP

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 4 июля 2017 г.

  
  Description:
  BAT - 100 100mm FPV racing drone is just like a bat, because it is as light as a brushed one, however, the multirotor uses more powerful brushless motors and ESCs. With the integration of 4-in-1 ESC and AIO FPV camera, this incredible RC quadcopter measures less than 30g after its battery is taken off, which means high maneuverability. The little racer is dedicated to indoor and outdoor race, 48 channels are provided for FPV racing, including RaceBand; besides, freewheeling and active braking are allowed to create more excitement.
  
  Main Features:
  ● Ultralight mini multicopter with carbon fiber frame, less than 30g ( excluding battery )
  ● 0705 15000KV high RPM brushless motor + 4-in-1 brushless ESC for thrilling flight
  ● F3 flight control system features a variety of functions, stability and responsiveness
  ● 600TVL AIO FPV camera with integrated 5.8G 48CH 25mW video transmitter and antenna
  ● 3.7V 500mAh 30C LiPo for 4 - 6 minutes' flying after only 20 minutes' charging
  
  Specifications:
  Wheelbase: 100mm
  Size: 95 x 80 x 25mm
  Frame material: 3K carbon fiber
  Weight: 29.1g ( without battery ); 42g ( with battery and propellers )
  Brushless motor: 0705 15000KV
  Brushless ESC: 4-in-1 10A
  Propeller: 56mm two-blade
  Compatible receiver: PPM / SBUS / DSM
  Battery: 3.7V 500mAh 30C LiPo ( included )
  Flight time: 4 - 6 minutes
  Buzzer: 13 x 13mm ( including LED )
  
  Teeny1s F3 Flight Controller
  Size: 20 x 20 x 5mm
  Mounting hole: 16 x 16mm
  Processor: STM32F303 MCU
  IMU: MPU6000 SPI
  OSD: BetaFlight OSD
  Firmware version: OMNIBUSF3 BetaFlight 3.1
  
  Teeny1s 4-in-1 6A ESC
  Size: 20 x 22 x 5mm
  Mounting hole: 16 x 16mm
  Firmware version: BLHeli - S 16.6
  Power supply: 1S LiPo
  Continuous current: 4 x 6A
  Burst current: 4 x 7A ( up to 5 seconds )
  
  AIO FPV Camera
  Horizontal resolution: 600TVL
  Output power: 25mW
  Channels: 48, including RaceBand
  TV system: NTSC / PAL switchable

  Specification

  General	Type: Frame Kit Version: PNP
  Motor	Model: 0705 Motor Type: Brushless Motor KV: 15000
  Flight Controller	Flight Controller Type: F3
  Camera	Video Resolution: 600TVL ( horizontal ) Video Standards: NTSC,PAL Sensor: CMOS
  Electronic Speed Controller	Firmware: BLHeli-S Functions: DShot600
  Battery	Battery (mAh): 500mAh Battery Coulomb: 30C Charging Time.: 20mins
  Dimension and Weight	Package weight: 0.4650 kg Product size (L x W x H): 9.50 x 8.00 x 2.50 cm / 3.74 x 3.15 x 0.98 inches Package size (L x W x H): 15.00 x 15.00 x 5.00 cm / 5.91 x 5.91 x 1.97 inches
  Package Contents	Package Contents: 1 x Drone ( Battery Included ), 4 x Spare Propeller

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод