EMAX F4 Magnum AIO FPV Stack Flight Control System

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 6 июля 2017 г.

  
  Description:
  EMAX F4 Magnum flight control system turns building a high-performance FPV racer for racing or freestyle extremely easy.
  This tightly integrated system packs the FC, ESC, RX, VTX, PDB, current sensor and OSD together, which can be easily upgraded. It significantly reduces the time in soldering and figuring out what to do, thus, it can help you to get a flawless drone with nice clean build within a short time.
  
  Main Features:
  ● 6-in-1 main board: F4 FC + BetaFlight OSD + LC filter + 5V 3A BEC + 16MB black box + buzzer
  ● 5.8G 48CH VTX, 25mW / 200mW switchable. Also includes a 5.8G whip antenna and SMA adapter
  ● FrSky XM+ 16CH SBUS receiver with RSSI. Possible to connect RX of other brands via the RX pads
  ● Bullet 30A 4-in-1 ESC + current sensor, as well as freedom to choose DShot, Multishot, Oneshot125
  
  Click here to download the user manual.
  
  Specifications:
  6-in-1 Main Board
  Flight controller ( OMNIBUSF4 firmware )
  STM32F405 MCU
  MPU6000 accelerometer / gyro ( connected via SPI )
  Onboard BetaFlight OSD
  Onboard buzzer
  Integrated 5V 3A BEC
  Integrated LC filter
  Dedicated PPM / SBUS receiver input
  Onboard high-capacity 16MB black box flight log recorder
  3 UART pads
  Addressable LED pad
  
  Video Transmitter
  Frequency band: 5362 - 5945MHz
  Channels: 48 ( band / channel chart can be found on the manual )
  Power: 25 / 200mW switchable
  Supply voltage: 4.5 - 5.5V
  
  4-in-1 ESC
  Continuous current: 4 x 30A
  Burst current: 4 x 40A
  Supply voltage: 2 - 4S LiPo
  Processor: EFM8BB21F16G 50MHz MCU
  Firmware: BLHeli - S
  Supports DShot, Multishot,Oneshot125
  Top quality MOSFET
  3oz high TG PCB board
  Onboard current sensor
  
  FrSky XM+ Receiver
  D16 Mode
  16-channel SBUS output
  RSSI on Channel 15

  Specification

  General	Type: Flight Controller Set
  Flight Controller	Flight Controller Type: F4
  Electronic Speed Controller	Firmware: BLHeli-S Functions: DShot150,DShot300,DShot600,Multishot,Oneshot125 Input Voltage: 2 - 4S
  Dimension and Weight	Package weight: 0.1750 kg Product size (L x W x H): 3.60 x 3.60 x 1.50 cm / 1.42 x 1.42 x 0.59 inches Package size (L x W x H): 10.00 x 6.00 x 3.00 cm / 3.94 x 2.36 x 1.18 inches
  Package Contents	Package Contents: 1 x Magnum Flight Control System, 1 x XT60 Female Connector, 2 x Heatshrink Tube, 2 x Silicone Wire, 1 x Antenna Adapter with SMA Female Connector, 1 x 5.8G Whip Antenna, 1 x Set of Nylon Fittings, 1 x English Manual

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод