Leader - 120 120mm FPV Racing Drone - PNP

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 8 июля 2017 г.

  
  Description:
  Leader - 120 is an exceptional drone intended for breathtaking FPV racing. The quadcopter comes with an 80C LiPo battery, which means that it can accelerate to the highest speed instantly. The 3K full carbon fiber chassis and lateral boards are thick enough to cope with considerable impact in case of a crash. More importantly, you are able to adjust the PID and OSD settings via the transmitter and BetaFlight ground station respectively, which is quite convenient.
  
  Main Features:
  ● Furious and stable - 80C LiPo, 1104 7500KV motor, 70mm three-blade propeller
  ● Durable 3K carbon fiber material, 3mm thick chassis + 2mm thick lateral boards
  ● Minicube F3 6DOF FC with OSD compatible with CleanFlight and BetaFlight firmware
  ● Remote PID adjustment and configuration of OSD via BetaFlight ground station
  ● 600TVL AIO camera with adjustable angle, 5.8G 48CH 25mW VTX and whip antenna
  
  Specifications:
  Wheelbase: 120mm
  Size: 115 x 90 x 30mm
  Weight: 70g ( not including battery )
  Frame material: 3K carbon fiber
  Bottom plate thickness: 3mm
  Lateral plate thickness: 2mm
  Brushless motor: 1104 7500KV
  Brushless ESC: 4-in-1 BLHeli - S 10A
  Propeller: 70mm three-blade
  Camera: 600TVL CMOS
  Video transmitter: 5.8G 48CH 25mW NSTC
  Flight controller: Minicube F3 6DOF with OSD
  Buzzer size: 13 x 13mm ( with integrated LED )
  Battery: 7.4V 550mAh 80C LiPo ( included )
  Flight time: 3 - 6 minutes
  
  Minicube F3 6DOF Flight Controller
  Size: 27 x 27 x 5mm
  Mounting hole spacing: 20mm
  Processor: STM32F303 MCU
  IMU: MPU6000 SPI
  OSD display: battery voltage, RSSI, flight mode, flight duration, aircraft name etc.
  Firmware: OMNIBUSF3 BetaFlight 3.1
  
  Minicube 4-in-1 BLHeli - S 10A ESC
  Size: 27 x 27 x 5mm 
  Mounting hole spacing: 20mm
  Firmware: BLHeli - S 16.5
  Processor: BB2 48MHz chip
  Power supply: 2 - 3S LiPo
  Continuous current: 4 x 10A
  Burst current: 4 x 15A ( up to 10 seconds )
  BEC output: 5V 1A
  Programmable: yes
  BetaFlight passthrough ready
  DShot600 ( default ) ready

  Specification

  General	Type: Frame Kit Version: PNP
  Motor	Model: 1104 Motor Type: Brushless Motor KV: 7500
  Flight Controller	Flight Controller Type: F3
  Camera	Video Resolution: 600TVL ( horizontal ) Sensor: CMOS
  Electronic Speed Controller	Firmware: BLHeli-S Functions: Damped Light,DShot150,DShot300,DShot600,Multishot,Oneshot125,Oneshot42 Input Voltage: 2 - 3S
  Battery	Battery (mAh): 550mAh
  Dimension and Weight	Product weight: 0.0700 kg Package weight: 0.1930 kg Product size (L x W x H): 11.50 x 9.00 x 3.00 cm / 4.53 x 3.54 x 1.18 inches Package size (L x W x H): 15.00 x 15.00 x 5.00 cm / 5.91 x 5.91 x 1.97 inches
  Package Contents	Package Contents: 1 x Drone ( Battery Included ), 4 x Spare Propeller

  Product Safety Disclaimer:
  We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  Small Parts Disclaimer:
  These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

  
  

  Предложить перевод