Eagle Tree Systems Micro Vector Flight Controller w/OSD

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 21 июля 2017 г.

  Whether it's FPV racing, fixed wing FPV or indeed, any other form of FPV activity the Micro Vector flight controller with integrated on screen display (OSD) is for you.

  Don't let the diminutive size of the Micro Vector fool you into thinking its capabilities are anything less than amazing!

  Simple setup, full color OSD, programmable video power control for turning your camera and video transmitter on and off remotely or automatically on arm/disarm, GPS flight modes, data logging, telemetry are some of the Micro Vector's features with S-bus, Spektrum™, PWM and SPPM also supported.

  Setting up and tuning the Micro vector can be done in one of 3 ways: Windows GUI, using the OSD stick menus at the field or by using the optional info panel LCD.

  No time to set up a race course? The Micro Vector supports SkyGates virtual racing (GPS module required) so that you can challenge your friends to see who can fly the best time with a real model around the virtual course.
  
  Of course, the whole purpose of designing a micro flight controller is to allow it to be fitted into a micro sized model, and at 38 x 38 x 10mm, the Micro Vector will do exactly that.

   

   

  Features:
  • Simple setup and configuration
  • Full color OSD graphics
  • Multi-RF protocol
  • 5 RSSI types
  • Precise, low latency DMA enhanced control loop (<8 kHz)
  • Support for present and future Oneshot ESC protocols
  • Standard 30.5mm mounting hole centers
  • Suitable for multi-rotor and fixed wing
  • On board altimeter for altitude hold
  • Full telemetry
  • GPS capable GPS module required)
  • Supports SkyGates virtual racing (GPS module required)
  • Updateable
  • Compatible with existing Vector GPS V2 and current sensor/PSU modules and wiring harnesses
  • Programmable video power control
  • Fast 32-bit microcontroller

   

  
  Compatibility:
  • Standard 30.5mm mounting hole centers
  • PWM, SPPM, Spektrum Satellite and S-BUS Receivers supported, with 4 types of RSSI
  • BLHeli ESC configuration via USB port
  • Compatible with most PDBs, including those with built in current sensors
  • Multirotor airframes: Racing drone, Quad/Tri/Hexacopter or Y6
  • Fixed wing airframes: Traditional, elevon, V-tail

   

  
  Software compatibility:
  • The software is compatible with Windows™ 10, Windows™ 8/8.1, Windows™ 7, Windows™ Vista™, and Windows™ XP™. Most Windows based PCs, laptops, notebooks, and tablets (including the Surface™ Pro™) are compatible with the software.

   

   

  Specs:
  Type: Eagle Tree Systems Micro Vector Flight Controller w/OSD
  Processor: 32 bit
  Output: 5V & 12V 1A DC (500mA max on the 5V output if the alert buzzer/LCD is used.)
  Servo/ESC frame rate: Multirotor - <8kHz with MultiShot capable ESCs/Fixed wing - adjustable <400Hz
  Video format: NTSC/PAL composite (auto detect)
  Mounting holes: 30.5 x 30.5mm
  Dimensions: 38 x 38 x 10mm (w/case) 36 x 36 x 7mm (w/out case)
  Weight: 13g (w/case) 7g (w/out case)

   

  
  Included:
  Eagle Tree Systems Micro Vector Flight Controller w/OSD in case
  Set of 5 pigtail cables for precise installation

   

  
  Please note: Micro Vector is not recommended for large or heavy airframes, due to no or limited testing on these types of models at this time. Examples: giant scale fixed wing models, turbines, or multirotors larger than 650mm are not recommended.

  
  

  Предложить перевод