Seriously Pro Racing F3-Mini V2 Flight Controller

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 21 июля 2017 г.

  The Seriously Pro Racing F3 Mini V2 Flight Controller (SPRacingF3Mini) was designed to give awesome flight performance in a tiny race-ready package. In addition to the latest sensors, race timing and logging technology and the wealth of other features that make this the board of choice for many, this V2 version has an improved voltage regulator, improved board design and a cool green PCB.

  It has jaw-dropping fight performance using its advanced processer, sensor and software technologies to make your aircraft fly like it's on rails. Using Cleanflight software you get the precision flying responses you need for outstanding performance, especially for fast FPV racing!

  The SPRacingF3Mini features a race transponder system for recording your lap times. Each board comes with a special transponder code to identify you at race events. Compatible with i-LAP receiver systems. Two LEDs for clockwise and anti-clockwise race tracks.

  The SPRacingF3Mini has an ARM Cortex-M4 72Mhz CPU with Math co-processor (FPU) for efficient flight calculations that gets more done in less time. Loop times up to ~2x as fast as previous-generation STM32F1 based boards. It also has a full-set of sensors (Accelerometer, Gyroscope, Compass and Barometer) making each SPRacingF3Mini capable of GPS Navigation as well as sonar support for precision low altitude hold.

  The SPRacingF3Mini is also the first and only mini board that features a MicroSD card socket for logging. Supports MicroSD/SDHC up to 32GB!
  It is also the only full-featured mini-size board with USB socket which is not shared with serial ports. No more hassle configuring or flashing and the SPRacingF3Mini runs Cleanflight, which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
  
  This is a truly amazing miniature flight controller that will set new standards in flight control systems for multirotors, quad racing and fixed wing aircraft.

  http://seriouslypro.com/spracingf3mini

  
  Features:
  • Jaw-Dropping Flight Performance
  • Race Timing Transponder with unique code
  • Improved 5V regulator (BEC)
  • Next-Generation CPU
  • MicroSD
  • USB Port
  • Configurable
  • Small and very lightweight
  • Broad RC receiver Support
  • Programmable LEDs
  • Developer Friendly
  • Built in battery voltage monitoring
  • Sonar support for precision low-altitude hold
  • I2C Port
  • Buzzer port for audible warnings and notifications
  • GPS Ready

   

  Specs:
  Processor: STM32F303 CPU, 72Mhz inc FPU
  Micro SD: MicroSD card slot (SD/SDHC, upto 32GB)
  Accelerometer/gyro/compass: MPU9250
  Barometer: BMP280
  Voltage Regulator: 5V regulator for powering receiver and small servos
  Dimensions: 36 x 36mm board with 30.5mm mounting holes
  Weight: 6 grams

  Available Functions:
  1x 2pin though-holes for pin headers for Direct Connection of 2-5S Battery (25V Max)
  8x 3pin though-holes for pin headers for ESC/Servo connections
  1x 2pin though-holes for pin headers for UART3
  1x 6pin though-holes for pin headers for UART1 and PPM (for standard SerialRX/SBus/PPM lead)
  1x 3pin though-holes for pin headers for Telemetry/LED Strip
  1x 3pin though-holes for pin headers for Buzzer output
  1x 2pin though-holes for pin headers for RSSI and battery current monitoring
  1x 3pin though-holes for JST-ZH socket for Spektrum Satellite receivers.
  1x 4pin bottom mounted, recessed JST-SH socket for I2C
  1x 4pin bottom mounted, recessed JST-SH socket for UART2
  1x 4pin top mounted JST-SH socket for SWD debugging
  2x bottom mounted solder pads for sonar

  
  

  Предложить перевод