Turnigy Graphene 1300mAh 4S 65C Square Lipo Pack w/XT60

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 1 ноября 2017 г.

  TURNIGY Graphene battery packs have set the standard for performance, reliability and innovation. Now the serious FPV Drone racer can use the outstanding Graphene Square Pack. This pack is designed specifically to help balance your drone in all three axes. Being square this pack keeps the weight right in the middle of your drone for extreme maneuvering. It is also an excellent battery for freestyle fliers.

  Turnigy Graphene packs utilize carbon in the battery structure to form a single layer of graphene just 0.335nm thick, making that type of battery substrate the thinnest known to mankind. The graphene particles form a highly dense compound allowing electrons to flow with less resistance compared to traditional Lipoly battery technologies.

  The result is a battery capable of maintaining greater power output whilst remaining much cooler under load. Since heat and resistance are the natural enemies of batteries Graphene chemistry has significantly reduced these problems and the result is an incredible boost in cycle life.

  Turnigy Graphene Square batteries always provide POWER ON DEMAND with plenty of punch.

  
  Capacity: 1300mAh
  Voltage: 4S1P / 4 Cell / 14.8V
  Discharge: 65C Constant / 130C Burst
  Weight: 186g (including wire, plug & case)
  Dimensions: 51x50x39mm
  Balance Plug: JST-XH
  Discharge Plug: XT-60

  Note: Graphene LiPo Batteries only require a standard Lipo battery charger.

  Advantages over traditional Lipo batteries.
  • Power density: 0.15-0.17kw/kg (5Ah-16Ah)
  • Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
  • Stable High pack voltage through the duration of use. 
  • High discharge rate, giving more power under load.
  • Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
  • Greater thermal control, packs stay much cooler under extreme conditions
  • Higher capacity during heavy discharge.
  • Maintains higher pack capacity even after hundreds of cycles
  • Fast charge capable, up to 15C on some batteries.
  • Longer Cycle Life 600+

  
  

  Предложить перевод