Quanum Vandal 1/10 4WD Electric Racing Buggy (ARR)

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 2 декабря 2017 г.

  Hitting the dirt track has never been easier with the all new Quanum Vandal 1/10 4WD Buggy RTR and now it comes with a radio and upgraded ESC and motor pre-installed. You simply need your own battery.

  The Vandal is a tried and tested buggy that is perfect for those who just want to bash around the park but aren't afraid to get a bit of serious air time or those who are interested in getting into 4WD off-road racing but don't want to lay down the serious coin on a full blown race buggy. The Vandal will easily hold its own at most tracks.

  But we wanted to make it even better so we asked our good friends at HobbyWing for a reliable and robust power system that we could include with the Vandal RTR and ARR and they gave us the WP-10BL50 with a 3250kV 12.5T sensorless motor, both of which are suitable to run on 2S or 3S and built to last. The ESC can handle a constant 50A current and an impressive 300A burst, it has an integrated cooling fan (for 2S only) and can be adjusted through the set key on the ESC or through the HobbyWing ESC Program Card (sold separately). You can adjust the running mode, drag brake force, low voltage cut-off, punch and maximum brake force. This set up gives you a calculated top speed of around 42km/h on 2S (8.4V) battery or 62km/h on 3S, more than enough for most people.
  
  The Vandal chassis is lightweight yet rigid, offering a perfect combination of weight savings and strength. Additionally, it features a robust shaft driven 4WD system providing plenty of torque to both the front and rear wheels and virtually instantaneous acceleration. No belt drive system requiring fussy routine maintenance with this setup!  An adjustable slipper clutch protects the drivetrain and metal gear front/rear differentials.
  
  This ready to run model includes 1/10 buggy wheels, soft compound tires for increased traction and handling, as well as a wickedly styled, pre-painted body shell. With features such as fully adjustable suspension, oil filled shocks and adjustable camber/castor, it's easy to fine tune the ride to the conditions of your favorite track or bashing spot.

  If you've never met the Vandal 4WD Buggy before, now is the perfect time to get acquainted.

  
  Features:
  • Almost Ready to Run - Just install your own radio system and battery
  • Adjustable camber, caster and shock mounting positions
  • Low center of gravity chassis design
  • Shaft driven 4WD system
  • Adjustable slipper clutch
  • Metal gear front/rear differential
  • Oil filled shocks
  • Soft compound tires for increased traction
  • Pre-painted and trimmed body shell w/decal sheet included
  • Pre-installed motor, ESC, and steering servo
  
  Specs:
  Length: 415mm
  Width: 255mm
  Height: 142mm
  Wheelbase: 275/280mm
  Gear Ratio: 11.2:1
  Hex Hub Size: 12mm
  Tire: Front: F88x34mm  Rear: F88x39mm
  Battery Tray Dimensions: 142x46x24mm (MAX battery size)
  Motor: 3652 12.5T 3250KV
  ESC: 50A Brushless ESC with XT-60 Connector
  
  Required:
  2CH transmitter and receiver
  2S 3000~4000mAh lipoly battery

  
  

  Предложить перевод