Kingkong Fly Egg 130 Camera Racing Drone with Piko BLX FC and Spektrum DSM2 Receiver (PNF)

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 15 декабря 2017 г.

  The Kingkong Fly Egg 130 is an eggcellent (excuse the pun!!) small fun fly or racing drone that will give you hours of enjoyment in a very small package. The Fly Egg 130 is extremely durable and has great crashability due to its 2.5mm carbon base frame and arms, and also the egg shaped side frames that are made from 7075 aviation grade aluminum. Couple this with durable props, whip antenna and a lighweight and you would be hard pressed to break it in a crash, it is virtually indestructible.

  
  This is the plug n fly version that comes with a Spektrum DSM2 receiver, 4 in 1 10A 2/3S A10 ESC which supports MULTISHOT, ONESHOT and DSHOT. Also included is a PIKO BLX flight controller with the latest Betaflight firmware, an 800 TVL 150° camera with adjustable tilt angle, 4 x XT1104-7500Kv motors which are fully enclosed, 1 x 7.4v 550mah lipoly battery, 2 sets of 2840 props, 1 set yellow and 1 set white and a set of prop guards. Supplied as well is an onboard low battery warning buzzer, rear addressable LED lights, USB cable for re-flashing, a tool for undoing the props, spare rubber strap for the battery and 4 x motor protection seats. The package does not stop there,  the Fly Egg 130 also comes with a 16ch 5.8GHz 25mW or 100mW switchable VTX which comes preset to 25mW, to change this to 100mW does require a small amount of soldering. All in all this is a great little package that will have you flying and racing in minutes at a price that is extremely affordable.

  
  

  Features:
  • Plug n fly
  • Spektrum DSM2 receiver
  • 7075 aviation grade aluminum side frames
  • 2.5mm carbon base frame and arms
  • Extremely durable
  • Small and lightweight
  • Flexible whip antenna
  • PIKO BLX flight controller with latest Betaflight firmware
  • A10 4 in 1 ESC that supports MULTISHOT, ONESHOT and DSHOT
  • 16ch 5.8GHz 25mW/100mW switchable VTX
  • Adjustable camera angle
  • Fully enclosed motors
  • Low battery warning buzzer
  • Rear LED lights
  • Prop guards

   

  
  Specs:
  Model: Fly Egg 130 PNF
  Wheelbase: 130mm
  Fly Tower: 20 x 20mm
  Receiver: Spektrum DSM2
  Flight Controller: PIKO BLX with Betaflight firmware
  ESC: A10 4 in 1 10A
  Motors: XT1104-7500Kv brushless motors
  Propellers: 2840
  Camera: CM231 800TVL with 150° lens
  VTX: 16ch 5.8GHz 25~100mW switchable (see list of transmitting frequencies below)
  Battery: 7.4V 550mAH 80C
  Weight: 77.5g (without receiver or battery)

  VTX Transmitting Frequencies:
  Band 1: 5658 / 5705 / 5790 / 5806MHz
  Band 2: 5695 / 5740 / 5820 / 5843MHz
  Band 3: 5732 / 5760 / 5860 / 5880MHz
  Band 4: 5769 / 5780 / 5917 / 5945MHz

  Included:
  1 x Kingkong Fly Egg 130 PNF (DSM2 compatible)
  1 x 7.4V 550mAH 80C lipoly battery
  4 x Spare propellers
  1 x Propeller removing tool
  4 x Prop guards
  1 x Spare battery retaining band
  4 x Motor protectors
  1 x USB cable (for updating Betaflight firmware)
  1 x User manual

  Required:
  DSM2 compatible transmitter
  Suitable lipoly battery charger
  FPV goggles or monitor with 5.8GHz receiver

   

  Note: User manual available under the "Files" tab.

  
  

  Предложить перевод