Snapper7 75mm Brushless FPV Mini-Drone w/Frsky Reciever

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от 10 мая 2018 г.

  Mini-drones are very popular and they make it extremely easy to take to the sky. The Snapper7 comes ready build and includes a FrSky receiver, 700TVL camera and 48 channel video transmitter to get you jumping into the air. It weighs only 28g (w/o battery) and has a 75mm wheelbase making it ideal for indoor flying but can still take you outdoors.

   

  You will still need a FrSky compatible controller, a 1S 450mAh lipo battery and optional goggles to get the best onscreen flying. Power comes from small 9000KV brushless motors and easy control from an F3 flight controller with inbuilt OSD and running on Betaflight for easy configuration. This makes it easy to navigate all those obstacles or race tracks.

   

  The Snapper7 has a carbon fiber base with aluminum propeller guards so it will take some punishment if you hit the table leg. Get yours now before they run out.

   

  Features:
  • Betaflight support, multi-flight mode: ACRO/AIR/ANGLE
  • Powerful 19000KV Brushless motors and ESCs with BLHeli_S 
  • CNC aluminum alloy propeller guard
  • Betaflight OSD support, easy to get RSSI, Voltage and other info from your goggles
  • Adjustable FC settings via OSD
  • Frsky version receiver supports both EU LBT and NON-EU Frsky transmitter
  • Full telemetry function ready
  • FPV Camera with adjustable angle
  • F3 Flight Controller
  • Runs on a 1S 450mAh lipo battery (not supplied)

   

  Specs:
  Wheelbase: 75mm
  Size: 98.5x98.5x36mm
  Flight Controller: F3 with OSD
  MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
  Sensor: MPU-6000 (SPI connection)
  Firmware: Betaflight_3.3.0_Crazybee
  Motor: SE0703-19000KV Brushless
  ESC: 5A (each) BLHeli_S with DShot600
  Propeller: 40mm 3-Blade (CW and CCW)
  Receiver: Frsky D8/D16 switchable with telemetry, Compatible both of Non-EU and EU LBT transmitter
  Camera: 700TVL
  Camera FOV: 120°
  Video Format: NTSC
  Video Transmitter Output power: 25mw
  Frequency: 5.8GHz 6 bands 48 channels
  With Raceband: 5474 5945 MHz
  Weight: 28g (without battery)
  Power cable connector: PH2.0

   

  Includes:
  1 x Snapper 7 Drone
  1 x 40mm 3-blade propeller (2CW, 2CCW)
  1 x USB Lipo/LIHV Charger
  1 x Propeller disassemble tool
  1 x Screwdriver
  1 x Manual

   

  Required:
  Battery: 3.7V/3.8V (1S) 450mAh 30C-60C (PH2.0 connector)
  4CH or higher Transmitter and Receiver
  FPV Goggles or base station (optional)

  
  

  Предложить перевод